Ok guys I need a show of hands of who wants one. I will need a minimum of 10 plate sold to get this going. These plates will be fully CNC machined and made of 4140 chromoly steel, and will replace the stock cast aluminum bearing plate. JT and myself have been running the prototypes for the past year. I only have half a dozen passes on my car since the plate was installed, and JT has 20+ passes, and about 1500 + miles on his. I had my trans apart twice over the past year with no issues with this plate. JT didn't get a chance to take his apart yet, but will be after the season is over, and before we start making these. The buyer will need to provide the stock aluminum support plate, so i can remove the shift rod bushing, and install them in the steel plate. buyer will also need to provide a stock steel backing plate (the thin steel plate that is bolted to the aluminum support plate). I will be modifying this by adding two bolt holes and removing the portion over the input shaft all on the CNC. The price is $375.00 + shipping To make things easy on myself, shipping will be a $13 USPS flat rate box, Payment will be made through paypal or a money order. When paying through paypal If you choose NOT to gift the payment you will need to add 3% to your total. I will need a $200 deposit from everybody on the list before any stock is ordered, and the balance will be due upon completion. I think doing a list like in other group buys worked the best. Only put your name on the list if are 100% sure you will be buying one. list info should be your TM screen name, and your actual name.
My shipping address is
Adam Lengel
95 Oak st.
Palmerton, pa 18071
Please ask any questions you may have.
Timeline
Now till 12/1/15 To put your name on the list
12/1/15 till 12/15/15 To pay deposit ($200)
12/15/15 till 12/31/15 Time for myself to order and receive stock.
12/31/15 till 3/1/16 Time to machine all parts
3/1/16 till 3/7/16 week for shipping
1: glhs727-Cindy Lindsay (deposit paid for 2) (plates received)
2: rx2mazda-Carroll Roberts (paid in full) ( plates received) shipped
3: Pat- Patrick Culkin ( paid in full) (plates received) shipped
4: chargerturbo87-Steve Earsley (paid in full) (plates received) shipped
5: karlak-Karl Akridge (paid in full)
6: 135sohc-Craig Griffin (paid in full)(steel plate received) shipped
7: c2xejk-Edward Kelly (paid in full) (plates received) shipped
8: Ondonti-Brent Seman ( paid in full)(Kyle's plates received)
9: Ondonti-Brent Seman (deposit paid) (plates full)
10: Shadow-Robert Mclellan (paid in full) (plates received) shipped
11: DOHCRT-Vic Dobney (paid in full) (plates received) shipped
12: cjbintx-Chris Baker (paid in full) (plates received) shipped
13: cheezit53-Dominic Manzella (TD) ( paid in full) (plates received) Shipped
14: BadAssPerformance - JT (paid in full) (plates received) shipped
15: BadAssPerformance - JT (paid in full) (plates received) shipped
16: Turbo Joe (paid in full) (plates received) Shipped
17: TAFT CAMS-Nicolaus Kuehn (paid in full) (plates received) Shipped