Results 1 to 12 of 12

Thread: R/T Rear Rotors in 5x114.3mm?

  1. #1
    Garrett booster
    Join Date
    Nov 2009
    Location
    Holt, FL
    Posts
    188

    R/T Rear Rotors in 5x114.3mm?

    I'm building up a Frankenstein brake setup for my 05 Neon swap car. I'd like to jump up to the Spirit R/T rear brakes for it, but at the same time, I am converting the whole car over to 5 x 114.3mm bolt pattern. Does anyone know if there is an 'equivalent' vented rear disc rotor that has that bolt pattern? Yes, I can drill some R/T rotors, but one of my goals in this is to get away from custom made wear parts (I have a Wilwood setup, currently). I travel with the car a lot, and if I have a problem, I would really like to be able to go to a regular parts store, and get parts easily. It doesn't matter to me if I need to go to a "Brand X" part to get something that will work properly. Any insight would be most helpful. Thanks!

  2. #2
    turbo addict
    Join Date
    Feb 2010
    Location
    Piedmont, Ohio
    Posts
    4,109

    Re: R/T Rear Rotors in 5x114.3mm?

    Could use one of these

    http://www.rottenleonard.com/Drill-guide-price.html

    The 5x4 to 5x4.5 is the one you would want. 5x100 is only 1.6mm off from 5x4 and would work to redrill the rotors to the pattern you want.
    Ian Adams Function>Form 1990 shadow scrapped, too rusty:( 1991 Spirit R/T Scrapped, parts sold:( 1989 Turbo Caravan Daily beater with built-[I]ish [/I]​engine slowly evolving into weekend turbo beater.

  3. #3
    Garrett booster
    Join Date
    Nov 2009
    Location
    Holt, FL
    Posts
    188

    Re: R/T Rear Rotors in 5x114.3mm?

    Thanks for the link! I am, however, looking to parts bin engineer this, specifically to be able to replace parts on the road.

  4. #4
    Supporting Member Turbo Mopar Contributor 2.216VTurbo's Avatar
    Join Date
    Dec 2005
    Location
    SoCal the OC
    Posts
    6,675

    Re: R/T Rear Rotors in 5x114.3mm?

    Mini vans went 114 in '90, do any later gen vans have rear discs? Not sure Ive ever taken much notice of the later non-turbo Mini's

    AJ (no More Alan) 84 Rampage RT TIII/568 Quaife 87 GLHS dealer optioned Red 16V Masi/568/Quaife
    90 Masi 16V White/Ginger/Black
    89 TC Masi 16V Red/Ginger/Black
    86 GLHS #110 RoadRace Built 89 CSX-VNT Recaro Car
    89 Turbo Mini 'Woody' 85 GLHT 'RedBox'
    2014 Explorer DD'r 3.5Twin Turbo Ecoboost AWD and 500HP
    My profile page has over 20,000 views, I'm somebody LOL

  5. #5
    boostaholic
    Join Date
    Feb 2012
    Location
    socal
    Posts
    1,241

    Re: R/T Rear Rotors in 5x114.3mm?

    Aren't the long wheel base vans before 91 the ones with the 5x114.3 setup? My 90 turbo SWB is 5x100, not sure if its original tho. I've never seen discs on the back of a 2nd gen van.

  6. #6
    Garrett booster
    Join Date
    Nov 2009
    Location
    Holt, FL
    Posts
    188

    Re: R/T Rear Rotors in 5x114.3mm?

    Yes, they have rear discs on the later vans, but not sure if they are vented.

  7. #7
    boostaholic
    Join Date
    Feb 2012
    Location
    socal
    Posts
    1,241

    Re: R/T Rear Rotors in 5x114.3mm?

    The 3rd gen vans had solid rear discs.

  8. #8
    Garrett booster
    Join Date
    Nov 2009
    Location
    Holt, FL
    Posts
    188

    Re: R/T Rear Rotors in 5x114.3mm?

    Quote Originally Posted by Rrider View Post
    The 3rd gen vans had solid rear discs.
    They are 11.25" though, correct?

  9. #9
    turbo addict
    Join Date
    Sep 2006
    Location
    Indianapolis, IN
    Posts
    2,793

    Re: R/T Rear Rotors in 5x114.3mm?

    The 01 rear discs I'm using on the rear of my van are solid 290mm discs with parking brake drums. Quick conversion says they're 11.4". Also to my knowledge the only pre 91 vans with 5x4.5 were the factory 15" wheel vans.

  10. #10
    Moderator Turbo Mopar Staff Force Fed Mopar's Avatar
    Join Date
    Dec 2005
    Location
    Greenville/Spartanburg SC area
    Posts
    7,557

    Re: R/T Rear Rotors in 5x114.3mm?

    Pretty sure some of the 91-95 Grand Caravans or Town&Country vans had large pattern rear discs.
    Rob M.
    '89 Turbo GTC

    2.5 TIII stroker, 568 w/ OBX and 3.77 FD

  11. #11

    Re: R/T Rear Rotors in 5x114.3mm?

    Neil, I did a write up for my GLHS where I took the rear assembly off a 99 Concorde LHS and applied it to my car with relatively minimal effort.

    http://www.turbo-mopar.com/forums/kn...version-L-body

    There are some images missing from the write up, but if you have any questions (assuming you can use this), let me know.
    [SIZE="3"] [B]Jon Trotter[/B][/SIZE] [B]1985[/B] Dodge Shelby Charger, Currently decommissioned [B]1987[/B] Shelby GLHS, #937 [B]1987[/B] Shelby Lancer, #628 [QUOTE=Reeves;587010]I can be ready. Please send pics of wife. _____DodgeZ add comments here______[/QUOTE]

  12. #12
    Garrett booster
    Join Date
    Nov 2009
    Location
    Holt, FL
    Posts
    188

    Re: R/T Rear Rotors in 5x114.3mm?

    Great write-up!

Similar Threads

  1. 87 CSX Rear Rotors
    By Frank in forum Suspension, Brakes, Wheels, Traction
    Replies: 15
    Last Post: 05-10-2014, 04:53 AM
  2. Is there a 5x114.3 rear disc setup that will bolt up to our cars?
    By minigts in forum Suspension, Brakes, Wheels, Traction
    Replies: 28
    Last Post: 09-28-2011, 04:40 PM
  3. 92 rear vented rotors
    By Austrian Dodge in forum Parts Wanted
    Replies: 4
    Last Post: 02-21-2007, 12:48 AM
  4. 89 CSX vnt Shelby rear rotors
    By Johnny in forum Suspension, Brakes, Wheels, Traction
    Replies: 1
    Last Post: 01-16-2006, 11:08 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •