Results 1 to 2 of 2

Thread: Engine swap

  1. #1
    Mitsu booster
    Join Date
    Jun 2011
    Location
    Kunkletown,Pa
    Posts
    10

    Engine swap

    Im coming into an engine swap from my 2.2 turbo to a 2.5 turbo complete with turbo intake etc. Anything I need to know about the 2.5 and will this bolt in with no issues? its going along with y 568 trans previously posted about what clutch to run but not looking to drag so just need a plain clutch nothing fancy i see myself swapping later down the road when i have real $.

  2. #2
    Supporting Member Turbo Mopar Contributor 2.216VTurbo's Avatar
    Join Date
    Dec 2005
    Location
    SoCal the OC
    Posts
    6,675

    Re: Engine swap

    Read your post twice but still need more details to answer for ya, what is the donor car, what year, is the 2.5 complete and running, or just longblock or? Physically, the 2.2 and 2.5 are the same dimensions except for the oil pan and either clears any K frame but there can be issues depending on what parts you are using from your 2.2. For instance the water pump housing won't clear the common block 2.5 oil pain rails (without nothing or spacing) if you are using your old 2.2 accessories. What ECU are you using, in what chassis etc. Manifold differences, downpipe differences Garrett to Mitsu turbo etc. So my advice is if you want thorough answers from this group, be specific with your question and what you are starting with.

    AJ (no More Alan) 84 Rampage RT TIII/568 Quaife 87 GLHS dealer optioned Red 16V Masi/568/Quaife
    90 Masi 16V White/Ginger/Black
    89 TC Masi 16V Red/Ginger/Black
    86 GLHS #110 RoadRace Built 89 CSX-VNT Recaro Car
    89 Turbo Mini 'Woody' 85 GLHT 'RedBox'
    2014 Explorer DD'r 3.5Twin Turbo Ecoboost AWD and 500HP
    My profile page has over 20,000 views, I'm somebody LOL

Similar Threads

  1. engine swap
    By LeBaronMike in forum Engine - Block, Piston, Heads, Intakes
    Replies: 5
    Last Post: 01-08-2012, 02:03 AM
  2. engine swap help
    By briankubash in forum Maintenance & General Tech
    Replies: 4
    Last Post: 01-28-2011, 10:31 PM
  3. Keep early TI or swap to later TI during engine swap?
    By 86Shelby in forum Engine - Block, Piston, Heads, Intakes
    Replies: 5
    Last Post: 12-28-2009, 10:38 PM
  4. GLH engine swap
    By Dodgeglht in forum Maintenance & General Tech
    Replies: 6
    Last Post: 10-23-2006, 06:13 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •