How many have actually weighed their cars? What were the results? Supposedly Series 1 cars are supposed to be heavier than series 2s.
How many have actually weighed their cars? What were the results? Supposedly Series 1 cars are supposed to be heavier than series 2s.
I did mine.
Without anyone in the car. No engine cover (less than 10 pounds), no rear window, no targa tops….
2320 pounds
Great stuff for great cars! Poly engine mounts and bushings at: http://www.polybushings.com
Mike Wah could chime in. His series 2 was just weighed recently.
Had mine weighed and corner weighed during alignment , just gotta find spec sheet.
I have never seen a car that did NOT weigh more then the manufacturer specs
It's a long story on my car and it's weight. They swear it weighs 1850 lbs ish before adding the 350 lb ballast. My paper work says 2200 ish and I called them back 3 times to verify that was including ballast and everytime they said yes.
So 1850 lbs ? I would want to get it weighed again before spreading 1850 lb rumors.
Last thing I read suggested that a series 2 car is supposed to be 1950ish lbs. So 1850 is a maybe I suppose.
I will be back in florida in a week or so. I will track it down. I think I posted alignment specs before, but can't remember if weight and corner weight is on that sheet too.
If anyone is still keeping tabs here, mine is 2285lbs without me and about a half tank of fuel.
I will try n do it today. I will briefly have both a series one and a series 2. I will try n borrow a set of roll on race scales today
the series 2 hammerhead weighed in at 2270 and that was with about 5 gal of gas in a 22ish gallon enduro tank and a full cage. no passenger seat.
Blue car just aligned, corner balanced and weighed.
Weight with full tank of gas, and 185 lbs in driver seat was 2180.
That is an SCCA/NASA approved scale.
Last edited by polopharm; 04-21-2016 at 07:27 PM.