Can any body help me find them performance snap rings you use to set your clearance on your front and rear drums on my A-413 TRANS.
IS there a snap ring kit with all the different size snap RINGS for the A413 /
Can any body help me find them performance snap rings you use to set your clearance on your front and rear drums on my A-413 TRANS.
IS there a snap ring kit with all the different size snap RINGS for the A413 /
I'm fairly sure the 904 trans uses the same size snap rings.
Working on clearing the decks.
There are a number of race companies who carry parts for the 904 and transmission, I'll try to double check this weekend on the snap ring sizes (I have several 904 and 413 kits to compare steels and rings) A-500 and the 31RH, 42RH and 44RE are also in the same family as the 904.
Gary Donovan
Working on clearing the decks.
I looked at the clutches and steels I have here and would say it is close. The size difference is around 1/16" on an inch or so. I don't see why the snap rings cannot interchange. It would not hurt to check in with a local transmission shop and inquire about snap rings as they handle hundreds of different makes. Something from another application might work just fine, bring a drum and some clutches with you as examples.
Working on clearing the decks.