So I was going through Johnny's project thread looking at a bunch of pictures and noticed something interesting ( brought on by the tie rod replacement thread )
The series 2 suspensions are different than the series 1's
My rear subframe has a cross bar at the middle of the bobble strut mount that ends into corner gussets. My rear shocks are mounted on the outside of the engine subframe box and Johnny's are mounted on the inside where my car has gussets.
see the pics in post 104 on the project thread.
Which makes some of my info in the clutch thread wrong...for example, on his car, the shocks don't interfere with the tie rod zerk fitting when removing, looks like they're plenty far apart.
Can someone post a pic of a subframe, either series 1 or 2?