2.5 CB dipstick + tube.

[thedon809]

Just like the title says. I need a dipstick and tube for a common block engine using a 2.5 BS oil pan.

[acannell]

i think theres a chance these are still available new

[thedon809]

I was going to check tomorrow at work but figured I would ask here first. I know I got my 2.2 non cb tube from work.

[acannell]

okay for reference

for 2.5L

dipstick tube = 4387575
dipstick = 4483102

Thats from a 90 parts fiche so I would assume balance shafts

Chryslerpartsdirect comes up with $17.51 for the tube, $11.70 for the dipstick.

Not sure if you actually try to order it if they will really have it though..I think there are better parts search engines but I dunno what they are

[Fox]

have the part number for the 2.2 CB tube? just wondering if they are different part numbers since i have both tubes here and they are identical as far as i can tell

[thedon809]

From the reading I've done, the tubes are the same but dipsticks are different I think.

[thedon809]

Dipstick tubes are still available. They are about $20. The dipstick however is only available from vintage so I'm not sure they are making anymore of them.

[krut]

If they are only available from vintage, those are the last of them.

[thedon809]

Yup. Get them while you can. My cost on the stick was only like $10.

[acannell]

hmm three 2.2L dipstick part numbers in the 90 fiche:

4536-071 "EDF injected engine"
4483-102 "Turbo-intercooled" (looks to be same p/n as 2.5L)
4425-616 "EDD 16 valve"

There are two 2.2L tube part numbers in that same catalog:

4387-575 "Excluding 16 valve" (looks to be same p/n as 2.5L)
4425-617 "EDD 16 valve"

[thedon809]

I looked it up for a 94 shadow 2.5l. 575 was the tube and 102 was the stick.

[krut]

hmm three 2.2L dipstick part numbers in the 90 fiche:

4536-071 "EDF injected engine"
4483-102 "Turbo-intercooled" (looks to be same p/n as 2.5L)
4425-616 "EDD 16 valve"

There are two 2.2L tube part numbers in that same catalog:

4387-575 "Excluding 16 valve" (looks to be same p/n as 2.5L)
4425-617 "EDD 16 valve"

Asa, do you have a microfiche machine and the cards or are you looking at scans? If you have the cards that's a nice score.

I'd like to get me some fiche cards.

[acannell]

Asa, do you have a microfiche machine and the cards or are you looking at scans? If you have the cards that's a nice score.

I'd like to get me some fiche cards.

http://www.turbododge.com/forums/f4/...-pdf-82-a.html

you're welcome

[krut]

That's awesome. Thanks!

[krut]

http://www.turbododge.com/forums/f4/...-pdf-82-a.html

you're welcome

Looks like the site is down. If you have copies of the PDFs to send me, I can mirror them for everyone.

[acannell]

Looks like the site is down. If you have copies of the PDFs to send me, I can mirror them for everyone.

did you read the whole thread? there are new links on page 4 or something

edit: here they are:

http://www.turbododge.com/forums/f4/...ml#post2344815

[krut]

Yeah. I see it now. I found another mirror as well. Thanks.
I'll put another mirror up anyways.

[thedon809]

Is it just me or does the dipstick stick out way too far?

[acannell]

Is it just me or does the dipstick stick out way too far?

purely from memory that looks about right to me

[shmedley]

looks about right to me also. It goes a decent amount into the pan and it's not right at the bottom of the block