Results 1 to 12 of 12

Thread: Forsale at SDAC post

  1. #1
    boostaholic
    Join Date
    Jan 2008
    Location
    Penn Hills PA
    Posts
    1,331

    Forsale at SDAC post

    Post here what you will havbe forsale at SDAC



    Ill have a 5spd Van Kframe with arms and sway bar B/O
    Upper 2 Piece intake painted viper blue with matching V/C
    Other tidbits i have figured out yet

    Upper isnt ported.
    Last edited by Sgt Craig; 06-20-2015 at 06:08 PM. Reason: Wrong info

  2. #2

    Re: Forsale at SDAC post

    All Parts are for a 2.2L 89 Daytona Shelby T-top

    one used, good TII radiators
    A555 rebuilt in 2001 (have receipt) with 6K miles
    Shifter cables for above trans
    Stock exhaust manifold
    T-top felt strips, used but very nice
    All T-top trim 2 a pillar, 2 b pillar, two front, and two back
    2 T-top door hockey strips, used but in good condition
    CSR Electric water pump
    Factory Radio, with equalizer
    Windshield washer bottle with good pump
    2 drivers side axles
    1 passenger axle with carrier bearing
    several wiring harnesses
    1 computer from FWD (will have to see which cal it is)
    1 flywheel lightened by JEGS machine shop
    one retractable cargo cover
    one lower nose ground effects
    1 clockspring
    1 radiator overflow tank
    cast lower control arms (from Spirit RT)
    2 dummy axles to protect wheel bearings
    Eibach (0800.250.0450) 8" x 2.5" I.D. Coil-Over Springs, brand new in box
    Tons of brackets, and switches and other stuff I forgot about to pilfer through!
    Last edited by shelbymopar89; 06-20-2015 at 05:10 PM.

  3. #3
    boostaholic Turbo Mopar Contributor
    Join Date
    Feb 2006
    Location
    Westminster, MD
    Posts
    1,245

    Re: Forsale at SDAC post

    Are there specific rules for the swap meet? I have a bunch of stuff I can bring up, but dont have a booth...

    Omni GLH Hood
    GLH gfx and air dam
    GLH fog lights
    GLH rally lights
    Omni/Horizon fenders
    82 Rampage fenders
    Nick G. 1984 Dodge Rampage

  4. #4
    turbo addict
    Join Date
    Feb 2008
    Location
    Carmel, IN
    Posts
    1,607

    Re: Forsale at SDAC post

    I am VERY interested in the hood! But only if no clear coat problems or dents. Looking for one for Matchbox.
    [SIZE=3][COLOR=#000000]47 Time NHRA/IHRA drag race champ-----84 Plymouth Horizon/1 of 84 HO equipped from the factory/1910 lbs, 2.5 with carb, nearly 315,000 miles-----04 SRT4/S2 with S3 turbo/12.17 @ 119/DOTs/93 Octane/SOLD-----2003 PT Cruiser GT, won a True Street class at the 2017 National Muscle Car Association World Street Finals-----2010 Toyota Prius/my delivery truck, 77.9 mpg best and NOT A PLUG IN, nearly 230,000 miles and way over 5600 miles per month! [/COLOR][/SIZE]

  5. #5
    turbo addict
    Join Date
    Feb 2008
    Location
    Carmel, IN
    Posts
    1,607

    Re: Forsale at SDAC post

    Various boxes of Harbor freight small tools...screwdrivers, flashlights, etc.
    Like new 2.2 valve cover...cant remember if it says turbo
    Front door panels for 4 dr L body with one rear one...passenger side I think
    P body and L body gauge overlays
    A few nearly new tires
    Couple of good alternators
    Front of a 89? Daytona with door trim...Shelby? I will ONLY bring if someone says they are very interested...$50 for this
    [SIZE=3][COLOR=#000000]47 Time NHRA/IHRA drag race champ-----84 Plymouth Horizon/1 of 84 HO equipped from the factory/1910 lbs, 2.5 with carb, nearly 315,000 miles-----04 SRT4/S2 with S3 turbo/12.17 @ 119/DOTs/93 Octane/SOLD-----2003 PT Cruiser GT, won a True Street class at the 2017 National Muscle Car Association World Street Finals-----2010 Toyota Prius/my delivery truck, 77.9 mpg best and NOT A PLUG IN, nearly 230,000 miles and way over 5600 miles per month! [/COLOR][/SIZE]

  6. #6
    boostaholic bfarroo's Avatar
    Join Date
    Dec 2005
    Location
    Green Bay WI
    Posts
    1,440

    Re: Forsale at SDAC post

    I have new/like new lower intercooler hoses to sell. Picked them up at Rosin when i was down there for consulier parts, They must have got them with the motor package and never used them because they have never been clamped onto a turbo/intercooler. No hose clamp marks. Have all factory markings and part numbers, dusty and need some cleaning but would be good for a restoration.

  7. #7
    gone crazy Turbo Mopar Contributor J&H Ryan's Avatar
    Join Date
    Dec 2005
    Location
    TheMitten
    Posts
    1,927

    Re: Forsale at SDAC post

    I asked JT about selling stuff Tuesday but hes super busy I'm sure, but I'm wondering too. I can about fill the lebaron with stuff I'll never use and would rather sell cheap than box and ship. Maybe a yard sale on slow hotel nights, lol.
    Ryan
    92 GTC, TIII
    00 XJ

  8. #8
    gone crazy Turbo Mopar Contributor J&H Ryan's Avatar
    Join Date
    Dec 2005
    Location
    TheMitten
    Posts
    1,927

    Re: Forsale at SDAC post

    If we're registered, we're good for the swap meet. I'm bringing a few things...:

    SRT4 injector cover - $5
    SRT4 slave cyl (new) - $10
    SRT4 / Neon complete airbag set – driver/pass/covers/sensor box - $40
    TI or III coolant tank. $5
    Actron Timing light - $10
    1pc TII VC (black wrinkle w/ silver) - $20
    1pc TII VC (black gloss w/ silver) - $30
    TII airbox w/ filter - $20
    TII lower IC hose - $20
    rearview mirror - $1
    Silicone couples (not the ebay kind), small - $5
    Large “Y” reducer / 35 degree bend silicone coupler (neve used)- $15
    87-91 Daytona rear tail center section - $5
    93+ lebaron front turn signals - $5 for pair
    TU “Z” turbo brackets (have 2) $5 ea
    Aftermarket aluminum coolant tank - $5
    84-86 Daytona/Laser boost and message center - $10
    87-89 Daytona/Lebaron boost and message center - $10
    Good stock clutch disk - $10
    J and H body shift boots (80s style) $5 ea.
    Stock 87 Shelby Lancer 5spd computer/LM - $50
    Vibrant vac block - $10
    Custom vac block w/ fittings - $10
    Boost only (for diesel) AutoMeter Carbon Fiber boost gauge - $10
    TIII Timing gear – prototype - $20
    TIII Oil cap – stock - $10
    TIII Oil cap – aftermarket aluminum - $10
    TIII timing gear – crank – prototype - $10
    TIII cam gears - $50
    TIII Rods (4) - $50
    TIII headbolts (torqued once) - $10
    TIII tensioner / mount - $30
    TIII A/C Bracket - $30
    Vibrant boost Controller - $30
    Bulbs – new in package 1141 - $1
    LED bulbs - $1
    568 leather knob - $10
    SRT4 shifter assm - $20
    568 base - $5
    New aftermarket trans mount - $5
    Narrowband Autometer Carbon Fiber A/F ratio: $5
    12 button navigator replacement buttons – enough to repair 6-7 Navigators with spare “whoops” buttons - $30
    DEX-77 Amplifiers / wiring - $50
    21 factory lugnuts (no fancy caps) -$5
    Fender mount coil - $10
    Head mount coil - $10
    Sandblasted bare TB - $1
    Cylinder leakdown and compression gauges - $5 (missing fittings)
    New Valve spring compressor - $10
    87-89 Traveller - $5
    Spearco lic plate surround - $5
    Ryan
    92 GTC, TIII
    00 XJ

  9. #9
    boostaholic Turbo Mopar Contributor
    Join Date
    Feb 2006
    Location
    Westminster, MD
    Posts
    1,245

    Re: Forsale at SDAC post

    If someone would take it all, I'd let the hood, air dam, gfx, fog lights, and rally lights go for $250. I can bring it to Carlisle, but it has to be picked up since I cant bring it inside the fairgrounds.
    Nick G. 1984 Dodge Rampage

  10. #10
    Garrett booster
    Join Date
    May 2009
    Location
    Riverview, NB, Canada
    Posts
    156

    Re: Forsale at SDAC post

    Quote Originally Posted by shelbymopar89 View Post
    All Parts are for a 2.2L 89 Daytona Shelby T-top

    one used, good TII radiators
    A555 rebuilt in 2001 (have receipt) with 6K miles
    Shifter cables for above trans
    Stock exhaust manifold
    T-top felt strips, used but very nice
    All T-top trim 2 a pillar, 2 b pillar, two front, and two back
    2 T-top door hockey strips, used but in good condition
    CSR Electric water pump
    Factory Radio, with equalizer
    Windshield washer bottle with good pump
    2 drivers side axles
    1 passenger axle with carrier bearing
    several wiring harnesses
    1 computer from FWD (will have to see which cal it is)
    1 flywheel lightened by JEGS machine shop
    one retractable cargo cover
    one lower nose ground effects
    1 clockspring
    1 radiator overflow tank
    cast lower control arms (from Spirit RT)
    2 dummy axles to protect wheel bearings
    Eibach (0800.250.0450) 8" x 2.5" I.D. Coil-Over Springs, brand new in box
    Tons of brackets, and switches and other stuff I forgot about to pilfer through!
    T-top felt strips - are they still available? Are the OEM or aftermarket. I understand the OEM ones have a metal strip inside?

    I'd also like to know if you still have the following:

    All T-top trim 2 a pillar, 2 b pillar, two front, and two back
    2 T-top door hockey strips, used but in good condition
    1 computer from FWD (which cal ?)
    Last edited by omniac; 07-09-2015 at 08:57 PM.

  11. #11

    Re: Forsale at SDAC post

    Quote Originally Posted by omniac View Post
    T-top felt strips - are they still available? Are the OEM or aftermarket. I understand the OEM ones have a metal strip inside?

    I'd also like to know if you still have the following:

    All T-top trim 2 a pillar, 2 b pillar, two front, and two back
    2 T-top door hockey strips, used but in good condition
    1 computer from FWD (which cal ?)
    I sold everything today except the computer, it is an 88/89 stage 5. It is located at the positive impressions booth if you are interested. I do have some of the rubber only felt strips at home (new)

  12. #12
    Garrett booster
    Join Date
    May 2009
    Location
    Riverview, NB, Canada
    Posts
    156

    Re: Forsale at SDAC post

    Quote Originally Posted by shelbymopar89 View Post
    I sold everything today except the computer, it is an 88/89 stage 5. It is located at the positive impressions booth if you are interested. I do have some of the rubber only felt strips at home (new)
    Ok thanks for the update. i already have the rubber only felts and was looking for OEM items.

Similar Threads

  1. General I don't know if I can post this here.. but it's forsale.
    By Shelby~Babe in forum Parts For Sale
    Replies: 5
    Last Post: 03-22-2008, 08:34 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •