I am in the process of refurbishing my harness and using a pinout diagram that I got from oldschoolhotrodder.com (THANKS!!!!) I can see that my SBEC has fewer/different wires than are noted on the SBEC pinout description. I was hoping some of you could provide input as to why this is.
Here are the differences:
Pins that are not present, but shown on the pinout diagram:
21- ATS
26- Serial Buss B+
46- Vehicle distance sensor
Pins whose conductors are a different color than noted on diagram:
11, 12- shows BK/TN on diagram, is LB/RD
29- shows WT/PK, is WT/OR
34-shows TN/RD, is DB/OR
54-shows LG/WT, is OR/BK
56-shows LG/OR, is GY/PK
Thanks!
-Les