90+ G body crossover cable

[moparzrule]

Found.

[dwh4784]

I still have this one. http://www.turbo-mopar.com/forums/sh...ble&highlight=

[moparzrule]

Arg, it's hard to pay that much when one just went on turbo dodge for $60. I was second in line, just missed it by a couple hours. I know that was a sweet deal though. I can get one from Rock Auto for $55 shipped to my door, not a mopar one obviously but it looks like I'm going to end up going that route, but I will throw out an offer of $85 shipped to you if you'd happen to take that for the mopar one. Doesn't seem like you'll take that, but worth a shot I guess.

[dwh4784]

No problem, if I can't make back what I shelled out for it (the selector was even more!) I'll just keep it for a spare. Maybe check with Chilort on the RA cables and see how they are working, I have PM's from about a year ago he almost bought mine but ended up giving them a shot.

[Force Fed Mopar]

Is the you need the one with the big bushing? If so, what should the overall length be?

[bfarroo]

FYI I gave up on the aftermarket cables for my 91. Tried both brands and they both failed within days of installing. Both had the cable pull out of the crimped end. Went with push pull stainless cables which are great but run about 360 for the pair.

[moparzrule]

Yeah I might still see what I can find in some local junkyards first.

Is the you need the one with the big bushing? If so, what should the overall length be?

I believe it's 55-57'' range.

[Force Fed Mopar]

Yeah I might still see what I can find in some local junkyards first.



I believe it's 55-57'' range.

I'll check what I have, I got a pile of cables.

[martin kolner]

here's what the 1990 book shows for the J,G bodies:

1 4446 840 1 J,G KNOB, Gearshift Lever (Ergonomic)
4471 213 1 G SHELBY Leather Wrapped
2 4471 170 1 J BOOT, Gearshift Lever
4471 173 1 G Gearshift Lever (Vinyl)
4446 866 1 G RING, G/Shift Lever Boot (Not Shown)
3 4431 351 1 MECHANISM, Gearshift
4 2 J SCREW, Mech. Attaching (Not Serviced)
5 6101 362 2 J NUT, Mech. Attaching
6101 362 4 G
6 4504 338 1 CABLE, Gearshift Crossover, 48.52" Lg.
7 4504 340 1 CABLE, Gearshift Selector, 55.00" Lg.
8 1 BRACKET, Front Console Mech. Mtg. (Refer to Group 8-A)
9 6501 431 2 CLIP, Cable Holding
10 6100 296 2 SCREW, Bracket
11 4431 375 1 BRACKET, Cable Holding
12 4269 830 2 CLIP, Cable Holding, Front
13 6101 445 1 NUT, Bracket Mtg., M8
14 6502 002 1 PIN, Lever Spring
15 4446 981 1 GROMMET, Crossover Cable, Dash, Black
16 4446 980 1 GROMMET, Selector Cable, Dash, Gray

for the P,A bodies:

1 4446 987 1 KNOB, Gearshift Lever
2 4446 885 1 P BOOT, w/Plate, G/Shift Lever
4471 169 1 P PLATE, G/Shift Lever Boot
4446 933 1 A BOOT, w/Bezel, G/Shift Lever
3 4431 352 1 MECHANISM ASSEMBLY, Gearshift
4 2 SCREW, Mechanism Mtg., (Not Serviced)
5 6501 483 2 NUT, w/Washer, Mech. Mounting
6 4504 339 1 CABLE, G/Shift Control Crossover, 45.37" Lg.
7 4504 342 1 CABLE, G/Shift Control Selector, 52.00" Lg.
8 6501 431 2 CLIP, Cable Attaching, Rear
9 4446 980 1 GROMMET, Selector Cable Dash, Gray
10 4446 981 1 GROMMET, Crossover Cable, Dash, Black
11 6100 296 2 SCREW, Bracket Mtg.
12 4431 375 1 BRACKET, Cable Mtg.
13 4269 830 2 CLIP, Cable Attaching, Front
14 6101 445 1 NUT, M8x1.25
15 6502 002 1 PIN, Lever Spring


all above for the 568 trans

4504338 1990-93 J,G
4504339 1990-94

[moparzrule]

Wow so the crossover cable is only 48 1/2 inches or so for G body, and ~45'' for a P body. Interesting.