Attachment 54352Attachment 54353Attachment 54354Attachment 54355I started working on Masi 16v under hood (SMEC) harness into my Shelby Lancer today. Right away I notice there appears to be a large "sub harness" attached to the under hood harness that is unlike anything I have ever seen before. It is attached to the main harness with zip ties up along the firewall edge for the most part. It has various connectors on both ends, a fuse/relay box, and additional firewall grommet for more wiring and another large connector. It appears to not have any circuits going between it and the main harness and is only held to the main harness with zip ties. Is this for the Maserati TC ABS system and can I just delete it for this swap? I hope so because it would get rid of a lot of unneeded bulk.
I'm sure I'll have more questions soon, but this is the first 'problem' I ran into.
In the pics, if you use the main 50-pin bulkhead plug as a reference, you can see the additional sub-harness attached along the firewall run with some wiring/connectors that come out near the windshield washer connectors, and some additional plugs, relay/fuse box, and 2nd firewall grommet near the passenger side strut tower.