Date: 14th April 2015
Username: turbovanmanČ
Full Name: Simon
City, State, Zip: Abbotsford, BC
Contact: Thread or PM
Ok, I have so much stuff so if you don't see something, just ask. I need to eliminate my clutter and just concentrate on one thing, my van. Everything plus shipping unless specified. I'll add more stuff as I start going thru my collection.
One more edit, US funds, and added a few more items.
I have 4 MP intake and exhaust +1mm valves, $40 each set of 4. SOLD
2x non a/c alt brackets, $25 each.
2x TIII timing belt crank sprockets, $30 each.
Garrett 60 trim compressor wheel and matching housing, $100. SOLD
FM TIII Garrett adapter elbow and SV, lets you use the stock DP, $150
2x TIII exhaust manifolds, $35 each
3X TIII intake manifolds, one is bare, $35 each Bare intake SOLD
VNT turbo, in pieces, turbine wheel/shaft ok, but comp wheel damaged. $100
MP 4529413 manual lash adjust set for 8 valve engines. $50 SOLD
Pair of TIII valve covers, $75 SOLD
PB front mount insert, small. $25 SOLD
2X minivan wiring harness's, all are 89, 2 are good, one has a few connectors missing IIRC. I'll go thru it and look. $70 for the good one, $50 for the slightly damaged one. meh one SOLD
One auto van Smec, maybe more, have to look on Monday, $60.SOLD
I have some Wiseco SRT pistons, standard bore, .866 pins, some slight skirt damage but perfect for a Hybrid setup. $125 with pins and locks.
Stock CB turbo rods, .866 sized bushings, hone out to .901 if needed, look to be in good shape, $80.
3 MP intake g head valves, P4349145 41.6 mm, 1.6 bigger than stock, lost one but I'll try and find it, $30 for the 3 valves.SOLD
Brand new Innovate LC1 and bung, $100 shipped.
3x TIII serpentine belt crank pulley's $15 each
1 intermediate shaft TIII pulley $20
1 black R/T grill, unpainted and undamaged, $30
2 chrome valve covers, ones an early carb style, the other's a tbi style with 2 breather nipples. $45 each.
2003 Neon SOHC cam head, complete but no manifolds, $75
3 CB timing belt pulley's, $40 each, shipped.
Non CB fan belt crank pulley with a/c, painted black, $10
1 CB fan belt crank pulley with a/c, $10
1 CB fan belt crank pulley no a/c, $10
Brand new Tall Deck cast pistons, .025" oversize, box reads 3.4646" $60
Billet fuel rail, I used it on my TIII but not sure if that's the application, lol. $75 SOLD
A413 transfer gears, 56/53 1.06 $50 and 47/45 1.04 $50
Billet low/reverse servo pistons, one uses a scarf seal, the other the stock seal, $75 each.
Newish large bolt pattern bolt in wheel bearings, $50 for the pair.
Brand new SKF 5x100 bolt in wheel bearings, $40 each.
NewmGrant 3 spoke steering wheel, 13.5", black and gray pleather, with adapter, $150. Missing one allen bolt, sigh.
TIII snorkel, $40
Blitz BOV mounted on a 2 1/4 pipe, $100
That's until I find more stuff.