Drag Week 2015... Team SDAC?

[BadAssPerformance]

Would have been great to have you along Joey!

[crusty shadow]

Congrats on the 9! Even better to do it at Drag Week for everyone to see!

I'm pissed as hell that I missed this, I had no idea drag week was starting off here in St Louis this year.. Gateway is my home track!

I assume you like the track?- they just repaved it a couple years ago.

[ajakeski]

Damn fine job man.

[moparman76_69]

http://hooniverse.com/2015/09/24/the...l-w-eric-rood/

They mention you guys, even though they don't have their facts straight.

[BIGBRUDDA]

Got any pics of the trailer carnage? Fleck and I had conversation about that as you guys pulled away.

[Ondonti]

Seems like you guys got upstaged by Joe's minivan on Facebook
Also interesting that the facebook crowd likes weird dodges a lot more than Hondas.

[BadAssPerformance]

Got any pics of the trailer carnage? Fleck and I had conversation about that as you guys pulled away.

Before and after... was too busy auto-x-ing thru the debris field to get a picture during...



- - - Updated - - -

Seems like you guys got upstaged by Joe's minivan on Facebook
Also interesting that the facebook crowd likes weird dodges a lot more than Hondas.

Hard to compete with a MiniVan!

[csxtra]

Hard to compete with a MiniVan!

Ain't that the truth!:

[moparman76_69]

Before and after... was too busy auto-x-ing thru the debris field to get a picture during...



- - - Updated - - -



Hard to compete with a MiniVan!

So it broke a weld and the tongue broke loose? If so someone on the GRM forum had a similar issue with one of those HF trailer kits.

[c2xejk]

I can't see all the parts on Reeve's trailer, but my on my HF trailer most things bolt together... Makes me glad I have welded on thing to tie the parts together (ie. like a roll cage stiffening a car...)

[moparman76_69]

If you look at the tongue you can see two bolts that appears to be where the tongue bolts on. It appears the part that would be welded to the frame broke loose.

[Pat]

It ripped the very thin (too thin!) sheet metal where the tongue bolts to the trailer in both places. After it happened , we looked at other HF trailers that other competitors were using. Many looked suspect in the same area, including JT's by the end of day 5.

[BadAssPerformance]

Yeah, mine looked a little wobbly was we loaded it into the Dakota. The tounge/neck bar is only a "C" channel and thin as Pat said and it is only held to the square frame by a few bolts in line, so no lateral gusseting or other any connection to the frame.

Ed, got any pics? I'll either mod this one or get a new one before another DW...

[BIGBRUDDA]

We saw a mustang towin a Uhaul small open trailer, pull in as youze guys were leavin the lunch stop. That seemed like a good idea to me. And ya get Uhaul roadside service.

[88C/S]

9.997 AWESOME! Great run!