Results 1 to 7 of 7

Thread: Help with 99 Ram extended cab rear door latch cables

  1. #1
    turbo addict
    Join Date
    Jan 2006
    Location
    Hazelwood, MO
    Posts
    6,566

    Help with 99 Ram extended cab rear door latch cables

    Well, just as the title says, I am looking for help with the door latch cables on my 99 Ram extended cab rear doors.

    I have seen and read that this is a common problem and today I found out why! Whoever designed that system, specifically where the cable attaches to the outer door latch. WTF were they thinking!? The cable is being forced to make a severely sharp 90* turn where it immediately terminates at the attach point! The turn radius is no more than 2". All of that bending stress is now on the termination sheath, which is also resisting a lateral motion on a plane perpendicular to the rotational axis. This causes a grinding motion, which eventually with vibration and use breaks the termination end in half rendering the inside handle useless.

    New cables are fairly inexpensive (~$30-40), but getting to it and well...it just shouldn't fail, damn it! So, does anybody have any experience with this? Suggestions? Want to add to my b*tch-fest?

    I would post pics, but I need to replace the lens on my phone's camera because I shattered it.

  2. #2
    turbo addict Turbo Mopar Contributor
    Join Date
    Dec 2005
    Location
    Seattle
    Posts
    7,063

    Re: Help with 99 Ram extended cab rear door latch cables

    So both are failed now or just the one? Not making me feel good about wanting a 1998 with rear door option. Maybe broken doors are still better than no doors.
    Brent GREAT DEPRESSION RACING 1992 Duster 3.0T The Junkyard - MS II, OEM 10:1 -[I] Old - 11.5@125 22psi $90 [U]Stock[/U] 3.0 Junk Motor - 1 bar MAP [/I] 1994 Spirit 3.0T - 11.5@120 20 psi - Daily :eyebrows: Holset He351 -FT600 - 393whp 457ft/lb @18psi 1994 Spirit 3.0T a670 - He341, stock fuel, BEGI. Wife's into kid's project. 1990 Lebaron Coupe 2.2 TI/II non IC, a413 1990 Spirit 3.0 E.S. 41TE -- 1993 Spirit 3.0 E.S. 41TE -- 1994 Duster 3.0 A543 1981 Starlet KP61 Potential driver -- 1981 Starlet KP61 Parts -- 1983 Starlet KP61 Drag 2005 Durango Hemi Limited -- 1998 Dodge 12v 47re. AFC mods, No plate, Mack plug, Boost elbow -- 2011 Dodge 6.7 G56

  3. #3
    turbo addict
    Join Date
    Jan 2006
    Location
    Hazelwood, MO
    Posts
    6,566

    Re: Help with 99 Ram extended cab rear door latch cables

    Nah, it's only still the driver's side. But with enough use I bet the other side will fail, too.

    The outside latches still work fine. Those are attached to the catches by rods.

    I would get a full 4-door cab in the future.

  4. #4
    Moderator Turbo Mopar Staff Vigo's Avatar
    Join Date
    Feb 2006
    Location
    San Antonio,TX
    Posts
    10,798

    Re: Help with 99 Ram extended cab rear door latch cables

    Rear passengers can reach the outside handles if they try. I probably wouldn't even fix it.

    Dont push the red button.You hear me?

  5. #5
    turbo addict
    Join Date
    Jan 2006
    Location
    Hazelwood, MO
    Posts
    6,566

    Re: Help with 99 Ram extended cab rear door latch cables

    The outside handles can absolutely be reached by the rear passengers. It's just a lot less convenient.

  6. #6
    turbo addict
    Join Date
    Jul 2007
    Location
    Niagara Falls, ON
    Posts
    7,548

    Re: Help with 99 Ram extended cab rear door latch cables

    If I'm understanding it right, it's the end of the sheath messes up?

    I'd be thinking some kind of extra clamp to support it, maybe get a small chunk of ally, drill through it, saw across hole, then drill/tap other way for clamping/mounting screws.

    Or something like that made from brake line clips.... plus a bunch of graphite lube.

    Orrrrr, completely re-engineer with solid pushrods and bellcranks.
    DD1: '02 T&C Ltd, 3.8 AWD. DD2: '15 Versa Note SV, replacing.. DDx: '14 Versa Note SV << freshly killded :( ....... Projects: '88 Voyager 3.0, Auto with shift kit, timing advance, walker sound FX muffler on 15" pumpers wrapped in 215/65/R15 H rated Nexens.... and a '95 phord escort wagon PnP head << Both may need to go :( ..... I like 3.0s ... so??? ... stop looking at me like I've got two heads!

  7. #7
    turbo addict
    Join Date
    Jan 2006
    Location
    Hazelwood, MO
    Posts
    6,566

    Re: Help with 99 Ram extended cab rear door latch cables

    If you think about the cable like one of our shift cables, the part of the sheath that "clips" into the holding bracket...that part over time basically just gets cut off, so there's nothing left to hold the cable from moving that direction because the end is floating.

    The problem is the angle at which the cable is expected to enter into the holding bracket. In a static situation where it would never move or operate...yeah, it's fine. As soon as you start putting ANY stress on it...you are already helping it fail. It truly is a crap design.

    I think I am going to end up with some sort of mechanical something to make it durable. We'll see. It's kinda low on my list right now.

Similar Threads

  1. Door Latch Adjustment
    By 5DIGITS in forum Maintenance & General Tech
    Replies: 6
    Last Post: 11-21-2016, 01:51 PM
  2. 90 Daytona , passenger door , won't unlock when pulling door release latch
    By Under pressure in forum The Original "Turbo Dodge" Cars
    Replies: 12
    Last Post: 04-17-2012, 11:32 AM
  3. General WTB Charger Door Latch
    By LaserGurl in forum Parts Wanted
    Replies: 3
    Last Post: 07-15-2009, 09:38 PM
  4. 88 G Body door will not latch
    By inplansight in forum "I need help!"
    Replies: 7
    Last Post: 03-04-2009, 12:08 AM
  5. L body door latch
    By Turbulence in forum Maintenance & General Tech
    Replies: 10
    Last Post: 02-19-2007, 08:00 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •