Looks like I'm missing the dowel pins for the block/head and a crankshaft key for my latest build. They are for a later TIII build but I'm pretty sure any 2.2/2.5 parts would do fine.
Looks like I'm missing the dowel pins for the block/head and a crankshaft key for my latest build. They are for a later TIII build but I'm pretty sure any 2.2/2.5 parts would do fine.
PM me if you still need them.
1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS!12.57@104 :O)
1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
2004 GSW TDI, 5 speed, fully loaded, modified.
Aurora ignition wires for sale. Link to info
Super60 roller cams or custom/billet cams. Link to info
I still need these for a 2.5L TIII I'm building. Apparently the machine shop pulled them out when they worked on it and are lost.
I need the deck dowel pins and also the tube sleeves for the bell housing. I have Paypal waiting if you can get these to me Simon!!
turbovanmanČ
Last Activity
06-21-2015 02:29
I do have pins and key. What is a tube sleeves for the bell housing? Got a picture?
The two lower 'ears' on the engine block have hollow dowels pressed in. Sort of like this https://www.pegasusautoracing.com/images/L/161-56.JPG
1994 Shadow Sedan. 2.2 N/A, A568 400,000 miles. "the science experiment"
1987 Shelby CSX #418. Long term rebuild and restore ?
^ Yes exactly and I need them!!
I checked, I only have the crank key and blow dowel pins on the deck. PM me if you're interested, thanks.
Thanks tryingbe for the crank key!
As far as the block dowel pins, I was able to find them available at the dealership. I probably should have done this to begin with, but hey, hindsight is 20/20. I was actually surprised that these are still available; although maybe I shouldn't be considering they are all the same for the 2.2/2.5 engines.
If anybody else needs these, the part numbers are:
block/head dowel pins: 6500402 -$3.71
block/trans dowel pins (tubular): 5240849 -$6.34
Funny thing happened when I was waiting to pay the cashier at the dealership. They paged Marty McFly over the intercom to pickup line #1.
Last edited by iTurbo; 10-26-2015 at 09:38 PM.
Posting Permissions
Reply With Quote