Hey Guys,
For a while I have had the issue of the drivers front brake caliper sticking slightly. It has worn the drivers pads considerably more than the passengers. I replaced the caliper and rubber line with no success. 89 Plymouth Voyager Turbo
Out of curiosity, as I was changing out my drivers front tire, I pushed the piston back into the caliper. I went in the car (it was off), and the pedal would only go half way to the floor as I clycled it to squeeze the pads back together. The piston eventually clamped the pads to the disc, but due to the limited stroke it took quite a few cycles. When I was changing the passenger front tire, I did the same thing, but the pedal went to the floor as I cycled it, pushing the pads together and firming up the pedal within a few cycles.
Any idea what is going on here?