Aftermarket battery terminals

[iTurbo]

I've been looking at getting some aftermarket battery terminals for my upcoming build(s). In the past I have been able to find aftermarket battery cables at NAPA that fit/function/look like stock and have been fairly happy with that.

This time I'm looking into aftermarket battery cable terminals that will allow me to do everything I want and are somewhat modular and would allow things to grow as needed. Like an additional audio amp or two, the ability to easily add in headlight relays, fuel pump relay, maybe a meth kit etc..

So far I've been looking at this from Crutchfield:

http://wwv.crutchfield.com/p_120048B...-Terminal.html

I'm thinking the 1/0 out put work for the starter motor, the 4-gauge would work for the accessory lead, and the two 8-gauge outlets could be used for accessory hookups like headlights and other things.

[cordes]

I've had good success with the gold ones you can get at autozone. I like the slimmer profile ones better for looks, but the AZ ones sure do work.

[135sohc]

Ordnance style terminals are very modular, just use a longer bolt if you need more 'stack' height. Or run the usual starter, hazard and charging feed as normal and run an additional lead wire to a proper buss bar for additional circuits.

[HSKR]

I use these on my truck and love them. Not only do they look good, but have all the outputs I need, two 4gauge and two 8 gauge. One on positive, one on negative.

http://www.ebay.com/itm/EFX-SCOSCHE-...item5d4119e0b5