Date: 12th February 2015
Username: moparzrule
Name: Matt
City, State, Zip: Carlisle, PA 17015
Contact: PM
Price: $260+ shipping (paypal or postal money order)
Description:
Clearing out some stock I have in my shed so I'm selling this fresh ported 2 piece intake manifold. The lower half was media blasted and painted with 2000 degree ceramic paint. Upper half has stock paint intact, fair condition. The two halves were port matched to each other and runners polished. Upper half is ported for 52mm TB. Lower half was taken to 1/16'' from the gasket, and bumps in the runners were 75% removed (the most you can safely go without welding the rear for reinforcement). All flanges were surfaced, and a new fel-pro gasket was used to bolt the 2 halves together. Fittings were removed, cleaned, and reinstalled with new sealant. Comes with the fuel rail wiring harness.
Trades considered- Eibach springs for G body, TU large spline 4 puck clutch, FWD-P F4 cam, fuel cell with a pump better than a walbro 255 (atleast 6 gallon cell and I'm not interested in a pump without a cell)