So I tried doing some searching and really didn't find the answers for what I wanted. So here's my issue.
I installed the Plymouth Acclaim tallights on the car and wired up the blinker into the reverse location using amber LED bulbs. Installed an electronic flasher and everything works good. Problem is, I tried putting LED bulbs into the front park/turn signals as well, and the blinkers work until I turn on the parking lights. Then both turn signal indicators in the dash come on and the blinkers don't work. Since this car has bulb out detection and indicators, will I need to run resistors for the front parking lights to prevent this? It's the only thing I can think of that would be causing the issue.
For now I have put regular bulbs back into the front park/turn sockets so I have functional lights and blinkers. Still have LEDs in the rear with no issues.
Reply With Quote
