Results 1 to 13 of 13

Thread: 1992 Turbo III Engine Whole or Parts +.040 JEs Ti Retainers

  1. #1
    Mitsu booster
    Join Date
    Feb 2015
    Location
    Newark, DE USA
    Posts
    7

    1992 Turbo III Engine Whole or Parts +.040 JEs Ti Retainers

    Date: 04th February 2015
    Username: Master Tech
    Full Name:Karl Owens
    City, State, Zip:Newark, Delaware 19720
    Contact:kowensinc@aol.com
    Price:$1800

    Description:Complete Turbo III R/T long block, recently rebuilt block fully blueprinted bored and honed, decked, line bored +.040 JE pistons on rebuilt stock T2/T3 rods w ARP bolts, .010/.010 forged T3 crank, reconditioned stock head with titanium retainers, engine is disassembled, cams failed shortly after rebuild and car sat with head off, light surface rust on deck and bores,everything else inside looks new. I have the complete engine including manifolds, fuel rail etc. I have new rings and bearings. Asking $1800 for everything, all offers considered. I would have the piston skirts coated and hone the block to size.

  2. #2
    Mitsu booster
    Join Date
    Feb 2015
    Location
    Newark, DE USA
    Posts
    7

    Re: 1992 Turbo III Engine Whole or Parts +.040 JEs Ti Retainers

    the parting out has begun! I just sold some small parts which now basically make the engine useless as running engine. Will sell the block freshly honed and cleaned, w slightly used JE pistons, prepped rods w ARP bolts, new file fit SP moly rings, install your crank $800, .010/.010 T3/T4 crank $350 with new Clevite 77 bearings, nice virgin never cracked head very recent full recon with Titanium retainers ($300) $900 (will take cracked or otherwise bad heads on trade), valve cover,intake and exhaust manifolds, cam sprockets, cam and crank sensors, stock turbo core, stock turbine housing plus other parts.
    Last edited by Master Tech; 06-22-2015 at 09:29 AM.

  3. #3
    Mitsu booster
    Join Date
    Jun 2014
    Location
    Columbia Sc
    Posts
    15

    Re: 1992 Turbo III Engine Whole or Parts +.040 JEs Ti Retainers

    Do you have any lifters for the t-3 head? Cash in hand

  4. #4
    Mitsu booster
    Join Date
    Feb 2015
    Location
    Newark, DE USA
    Posts
    7

    Re: 1992 Turbo III Engine Whole or Parts +.040 JEs Ti Retainers

    I have about 8 good lifters

  5. #5
    Mitsu booster
    Join Date
    Jun 2014
    Location
    Columbia Sc
    Posts
    15

    Re: 1992 Turbo III Engine Whole or Parts +.040 JEs Ti Retainers

    Pm sent

  6. #6
    Garrett booster
    Join Date
    Mar 2015
    Location
    Mexico City
    Posts
    73

    Re: 1992 Turbo III Engine Whole or Parts +.040 JEs Ti Retainers

    how much the titanium valve retainers?

  7. #7
    Mitsu booster
    Join Date
    Feb 2015
    Location
    Newark, DE USA
    Posts
    7

    Re: 1992 Turbo III Engine Whole or Parts +.040 JEs Ti Retainers

    cylinder head sold, still have good used short block with +.040 JE pistons, good rods w ARP bolts, good forged steel crank, short block disassembled because it has been sitting for some time, block sent out cleaned and honed, crank polished, ready for assembly with new rings bearings and oil pump $1000

  8. #8
    Garrett booster
    Join Date
    Mar 2015
    Location
    Mexico City
    Posts
    73

    Re: 1992 Turbo III Engine Whole or Parts +.040 JEs Ti Retainers

    do you sell only the pistons???

  9. #9
    Garrett booster
    Join Date
    Jan 2011
    Location
    Belleview
    Posts
    242

    Re: 1992 Turbo III Engine Whole or Parts +.040 JEs Ti Retainers

    Do t3 pistons work for masi heads also?

  10. #10
    turbo addict
    Join Date
    Dec 2006
    Location
    MPLS, MN
    Posts
    3,589

    Re: 1992 Turbo III Engine Whole or Parts +.040 JEs Ti Retainers

    Quote Originally Posted by MPI_duster View Post
    Do t3 pistons work for masi heads also?
    About the only thing they have in common is they have 4 valve reliefs (lol). They are about as different as can be. Lotus has big deep chamber in head and Masi has much more shallow chamber. Therefore the Lotus pistons have very small dish while the Masi piston dish is so large minnows could swim in the dish.
    Todd

  11. #11
    Garrett booster
    Join Date
    Jan 2011
    Location
    Belleview
    Posts
    242

    Re: 1992 Turbo III Engine Whole or Parts +.040 JEs Ti Retainers

    Quote Originally Posted by 4 l-bodies View Post
    About the only thing they have in common is they have 4 valve reliefs (lol). They are about as different as can be. Lotus has big deep chamber in head and Masi has much more shallow chamber. Therefore the Lotus pistons have very small dish while the Masi piston dish is so large minnows could swim in the dish.
    Todd
    So then yes? If the valve reliefs are the same, then there isn't a risk of contact. The dish should just influence compression ratio. Or am I missing something?

  12. #12
    turbo addict
    Join Date
    Dec 2006
    Location
    MPLS, MN
    Posts
    3,589

    Re: 1992 Turbo III Engine Whole or Parts +.040 JEs Ti Retainers

    Quote Originally Posted by MPI_duster View Post
    So then yes? If the valve reliefs are the same, then there isn't a risk of contact. The dish should just influence compression ratio. Or am I missing something?
    I don't want to hijack this guys FS thread anymore than we already have, but the short answer is NO they will not interchange! Most, if not all the the piston manufacturers have made Masi pistons for their customers. If you don't want to order direct from the manufacturers, our vendors; FM, FWD, and TU all have Masi pistons available.
    Original poster GLWS.
    Todd

  13. #13
    Garrett booster
    Join Date
    Mar 2015
    Location
    Mexico City
    Posts
    73

    Re: 1992 Turbo III Engine Whole or Parts +.040 JEs Ti Retainers

    do you have the complete engine wiring harness?????
    i need one fot my spirit Rt t3 1992

Similar Threads

  1. Engine 1992 Iroc r/t engine t-3
    By phenal in forum Parts For Sale
    Replies: 16
    Last Post: 03-03-2011, 12:56 AM
  2. General T2 Engine, Turbo Z, and 4 door sundance parts
    By 85shelbycharger in forum Parts For Sale
    Replies: 4
    Last Post: 10-28-2009, 08:28 PM
  3. General Clutch,Tools,Engine parts,AFPR,TB,Dizzy,Turbo parts, Etc...
    By moparfreak3 in forum Parts For Sale
    Replies: 16
    Last Post: 04-19-2009, 07:58 PM
  4. Electronics 1992 Daytona TURBO engine harness/ECU
    By 93notch in forum Parts Wanted
    Replies: 4
    Last Post: 06-05-2008, 09:01 PM
  5. Replies: 3
    Last Post: 06-07-2006, 09:45 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •