Results 1 to 4 of 4

Thread: Not running right

  1. #1

    Not running right

    Hey, I've been doing some preventative maintenance on my '89 Chrysler Lebaron T1. Changed out the water pump, replaced belt, had altenator rebuilt and car was running fine. Put car back in garage and found a fuel leak in the 5/16" fuel line so I replaced that. Start car up and checked for leaks and everything good except check engine light is now on, engine running a little rough and won't go any higher that say 3000 rpm's. It says code 13. A map sensor problem right ? How do I check the sensor ? I checked the vacumn lines and the electrical socket going to it.

    Thanks

  2. #2
    Rhymes with tortoise. Turbo Mopar Staff cordes's Avatar
    Join Date
    Dec 2005
    Location
    Tuscola, IL
    Posts
    21,441

    Re: Not running right

    A code 13 is going to be a vacuum line issue 99% of the time. Double check that you have everything routed correctly. I would guess that it's not since it's in limp mode. Sometimes I can get condensation in the lines when it's cold and that will throw a code 13 too.

  3. #3

    Re: Not running right

    Yep, got it fixed. It was a vacumn line.

  4. #4
    Rhymes with tortoise. Turbo Mopar Staff cordes's Avatar
    Join Date
    Dec 2005
    Location
    Tuscola, IL
    Posts
    21,441

    Re: Not running right

    Glad to hear that you have it fixed Jim.

Similar Threads

  1. still running but not right
    By 5sp. mini in forum "I need help!"
    Replies: 2
    Last Post: 11-17-2013, 09:30 AM
  2. Wanted running TM: TN, KY, MO, MS, SC, GA, AL, FL
    By glht_omni in forum Cars
    Replies: 25
    Last Post: 10-14-2010, 07:42 PM
  3. another one running
    By lancer402 in forum 2.2L/2.5L 16V Hybrid conversions
    Replies: 17
    Last Post: 01-10-2010, 03:09 PM
  4. anyone running a 16v in a k car
    By spoolinhard in forum 2.2L/2.5L 16V Hybrid conversions
    Replies: 8
    Last Post: 08-03-2007, 02:42 PM
  5. 87 T2 not running right!!
    By daytonaturbo87 in forum "I need help!"
    Replies: 3
    Last Post: 04-29-2007, 11:41 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •