I think the time has come to switch over to a new thread... the van is going under a hard new direction of what was originally intended.
The 1990 Caravan that we recently acquired is getting stripped and parts spread amongst our collection of vans.
Here's what we've got cookin' for this van...
Giant FMIC from CX Racing. Basically a Powerstroke intercooler in bar and plate core. Measures 39"x16"x3.5". Takes two people to carry it around.
Lengel custom intake with ported two piece lower along with Lengel ported and smoothed 58mm throttle body.
Pair of Snow 175 ml/min alcohol nozzles. Will go along with the Zex single fogger.
2.5" hot and 3.0" cold side polished aluminum charge pipe tubing with silicone couplers and stainless T-bolt clamps.
Ported +1mm cylinder head.
Exhaust side of the project. Tubing, 5 bolt weld flange, flex pipe, dump tube for wastegate, exhaust wrap, all for making the downpipe. Will run an electronic exhaust cutout and dump everything behind the K-frame once complete.
Tial 38mm external wastegate.
Turbine weld flange for custom header.
Turbine blanket.
When the exhaust valve is closed for the street, noise will be piped out back through a Magnaflow muffler...
Engine already has a 1 piece pan gasket but surely couldn't hurt to toss a new one on.
Painted K-frame. Will paint front lower control arms to match and complete with poly. bushings
More soon. I'll keep this thread updated as we get more parts. Expect the tear down of the donor van around beginning of February and the build on this around March-ish.
-Bryan