Wayne H.
'91 Dodge Spirit ES 2.5L turbo 5spd
'05 PT GT 2.4T HO autostick (RIP)
'89 Plymouth Acclaim 2.5L turbo auto, "Slugmobile" yes, THE Slugmobile!
'89 Dodge Caravan SE 2.5L turbo auto, "Mean Mini" yes, Gus' Mean Mini! (Current best 11.699 @ 114.43 mph! - Oct 15th, 2022 Cecil County Dragway, MD)
MeanMini dragracing videos: https://www.youtube.com/playlist?lis...URZLB1RxGYF6vw
and other cars, trucks and motorcycles
https://www.youtube.com/user/SlugmobileMeanMini
Then I'm hearing that's 5 minutes per side Wayne??????????????? Youtube aye? You can be my wrench any time Pal. It takes me that long to get one side up in the air and remove the tire. Then comes detaching of the knuckle from the strut. Then we still have to deal with the ball joint and the spindle nut. Lemme know when you're coming down to the beach again. I'll burn the steaks and pay for the sleep over for you both, Jer
six foot railway bar makes the swaybar a non issue
and 5 min .. yeah maybe doable ..maybe
Still possible to put my name on the list ?
What is the current price ? Sorry I did not read the previous pages
Good for P body with A568 trans ?
morrispower- L5- minivan\stick. lowered (measurements will be added tomorrow evening
What the hell...better safe than sorry, I don't want to have to scour every Autozone and O'Reilly's if I do Drag Week this year and happen to break an axle
1. Karlak G
2. turbo2point2 L-body
3. jcronk23 - G Body
4. ajakeski - Minivan/Auto (need to discuss/check length)
5. Pat - L body
6. eairgood - L body
7. wheming - Minivan/Auto (maybe)
8. 2.2mopar - L - 2 sets
9. Pat (for Barry Miles) - G body
10. CornflakesGLHT (Pascal Labelle) - Lbody - 568 w/quaife (no need to worry about shipping to Canada, will have you ship to my US address in NY)
11. morrispower - Minivan/stick (measurements - how about now? LOL)
12. csxtra - P body
Warren Hall
"My Name is Warren and my car is an alcoholic..."
OVC - SDAC "Our Sh*t Rolls!"
Cincinnati, OH
87 CSX # 741
317WHP - 380 WFt-Lbs (STD-5)
12.460 @ 113.2 - Race Gas + Methanol Injection
12.749 @ 109.84 - 91 octane + Methanol Injection (Still tuning...)"Illegitimi non carborundum."-General Joseph StillwellTD Runlogger Page Has Moved...
drivers side 17 1/2
passenger side 29 1/2
engine is perfectly center thanks drag weekers! lol
Did you happen to get lengths from some OEM axles? the aftermarket is a bit all over the place on lengths and how they are listed SMH
Autozone Duralast Gold
DS (overall compressed length) 26.125" (8277N)
PS (overall extended length) 41.125" (8270N)
Autozone Duralast Reman
DS (overall compressed length) 25.5-27.5" (8269)
PS (overall compressed length) 41.125" (8268)
O'Reileys Precision
DS (overall compressed length) 25-19/32" (CH-8036) notes say 26-5/32"
PS (overall extended length) 41.125" (CH-8037) notes say 41-5/32"
O'Reileys MasterPro
DS (length) 25.5"-25.75" (60-3001)
PS (length) 41.125" (60-3021)
O'Reileys MasterPro Reman
DS (length) 26" (60-3001S)
NAPA MaxDrive
DS (overall extended length) 26-1/16" (NMD 948001)
DS (overall compressed length) 26-1/16"
PS (overall extended length) 41.125" (NMD 958124)
PS (overall compressed length) 38.375"
JT
SDAC Director
SDAC-Chicago President
JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
87 Shelby Z - 10.50@141.66mph
87 CSX #751 Clone - 12.88@102.88mph
www.badassperformance.com
Check out Turbo-Mopar Times!
Submit your 1/4 mile times HERE!!
Support SDAC! Join Today!
"I'm not some pro athlete with a bajillion dollars, I'm just an every man"
Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.
morrispower, double checking, was that "at ride height" and "from trans seal face to face of wheel bearing"?
wheming, please measure this on yours for more data points!
-at ride height
-With engine centered
-from trans seal face to face of wheel bearing
JT
SDAC Director
SDAC-Chicago President
JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
87 Shelby Z - 10.50@141.66mph
87 CSX #751 Clone - 12.88@102.88mph
www.badassperformance.com
Check out Turbo-Mopar Times!
Submit your 1/4 mile times HERE!!
Support SDAC! Join Today!
"I'm not some pro athlete with a bajillion dollars, I'm just an every man"
Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.
OK, LAST CALL!!! Anyone else want in? Add your name to the list by FRIDAY Feb 2nd!
For those on the list, it's confirmation time! Need everyone on the list who wants in to email me jt@sdac.org with your contact info so I can get a final list going.
JT
SDAC Director
SDAC-Chicago President
JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
87 Shelby Z - 10.50@141.66mph
87 CSX #751 Clone - 12.88@102.88mph
www.badassperformance.com
Check out Turbo-Mopar Times!
Submit your 1/4 mile times HERE!!
Support SDAC! Join Today!
"I'm not some pro athlete with a bajillion dollars, I'm just an every man"
Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.
1. Karlak G
2. turbo2point2 L-body
3. jcronk23 - G Body
4. ajakeski - Minivan/Auto (need to discuss/check length)
5. Pat - L body
6. eairgood - L body
7. wheming - Minivan/Auto (maybe)
8. 2.2mopar - L - 2 sets
9. Pat (for Barry Miles) - G body
10. CornflakesGLHT (Pascal Labelle) - Lbody - 568 w/quaife (no need to worry about shipping to Canada, will have you ship to my US address in NY)
11. morrispower - Minivan/stick (measurements - how about now? LOL)
12. csxtra - P body
13. nvysion - P body w/ 1992 A568 (PM sent for infos)
Re: DriveShaft Shop Axles - Group Buy
1. Karlak G
2. turbo2point2 L-body
3. jcronk23 - G Body
4. ajakeski - Minivan/Auto (need to discuss/check length)
5. Pat - L body
6. eairgood - L body
7. wheming - Minivan/Auto (maybe)
8. 2.2mopar - L - 2 sets
9. Pat (for Barry Miles) - G body
10. CornflakesGLHT (Pascal Labelle) - Lbody - 568 w/quaife (no need to worry about shipping to Canada, will have you ship to my US address in NY)
11. morrispower - Minivan/stick (measurements - how about now? LOL)
12. csxtra - P body
13. nvysion - P body w/ 1992 A568 (PM sent for infos)
14. Cobrat93 - L body - L5 - A555
Last edited by CobraT93; 02-02-2018 at 12:22 AM.
Who received info ?
If it's not to late I'll take a set
J Body Auto
1. Karlak G
2. turbo2point2 L-body
3. jcronk23 - G Body
4. ajakeski - Minivan/Auto (need to discuss/check length)
5. Pat - L body
6. eairgood - L body
7. wheming - Minivan/Auto (maybe)
8. 2.2mopar - L - 2 sets
9. Pat (for Barry Miles) - G body
10. CornflakesGLHT (Pascal Labelle) - Lbody - 568 w/quaife (no need to worry about shipping to Canada, will have you ship to my US address in NY)
11. morrispower - Minivan/stick (measurements - how about now? LOL)
12. csxtra - P body
13. nvysion - P body w/ 1992 A568 (PM sent for infos)
14. Cobrat93 - L body - L5 - A555
15. Microreo - J Body Auto
OK, update below. Need to get everyone IN or OUT on this order.
If you are OUT, post here or email jt@sdac.org
If you are IN, email jt@sdac.org with:
-username
-real name
-address
-car year
-car model
-trans
-diff if not stock
1. Karlak G
2. turbo2point2 L-body
3. jcronk23 - G Body - Confirmation received!
4. ajakeski - Minivan/Auto (need to discuss/check length) - Confirmation received!
5. Pat - L body - Confirmation received!
6. eairgood - L body
7. wheming - Minivan/Auto (maybe)
8. 2.2mopar - L - 2 sets
9. Pat (for Barry Miles) - G body
10. CornflakesGLHT (Pascal Labelle) - Lbody - 568 w/quaife (no need to worry about shipping to Canada, will have you ship to my US address in NY)
11. morrispower - Minivan/stick (measurements - how about now? LOL) - Confirmation received!
12. csxtra - P body
13. nvysion - P body w/ 1992 A568 (PM sent for infos) - Confirmation received!
14. Cobrat93 - L body - L5 - A555 - Confirmation received!
15. Microreo - J Body Auto
JT
SDAC Director
SDAC-Chicago President
JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
87 Shelby Z - 10.50@141.66mph
87 CSX #751 Clone - 12.88@102.88mph
www.badassperformance.com
Check out Turbo-Mopar Times!
Submit your 1/4 mile times HERE!!
Support SDAC! Join Today!
"I'm not some pro athlete with a bajillion dollars, I'm just an every man"
Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.
OK, update below, thank you everyone for the confirmations and info. I'll let you know by email if I'm missing anything as I put the spreadsheet together. Any questions email jt@sdac.org
CornflakesGLHT, if you are IN, please email jt@sdac.org with:
-username
-real name
-address
-car year
-car model
-trans
-diff if not stock
1. Karlak G - Confirmation received!
2. turbo2point2 L-body - Confirmation received!
3. jcronk23 - G Body - Confirmation received!
4. ajakeski - Minivan/Auto (need to discuss/check length) - Confirmation received!
5. Pat - L body - Confirmation received!
6. eairgood - L body - Confirmation received!
7. wheming - Minivan/Auto - Confirmation received! (pending price)
8. 2.2mopar - L - 2 sets - Confirmation received!
9. Pat (for Barry Miles) - G body - Confirmation received!
10. CornflakesGLHT (Pascal Labelle) - Lbody - 568 w/quaife (no need to worry about shipping to Canada, will have you ship to my US address in NY)
11. morrispower - Minivan/stick (measurements - how about now? LOL) - Confirmation received!
12. csxtra - P body - Confirmation received!
13. nvysion - P body w/ 1992 A568 (PM sent for infos) - Confirmation received!
14. Cobrat93 - L body - L5 - A555 - Confirmation received!
15. Microreo - J Body Auto - Confirmation received!
JT
SDAC Director
SDAC-Chicago President
JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
87 Shelby Z - 10.50@141.66mph
87 CSX #751 Clone - 12.88@102.88mph
www.badassperformance.com
Check out Turbo-Mopar Times!
Submit your 1/4 mile times HERE!!
Support SDAC! Join Today!
"I'm not some pro athlete with a bajillion dollars, I'm just an every man"
Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.
OK, all in - will contact by email if I need more info
For those with Van's please try to get me any info on your van if you have not yet.
1. Karlak G - Confirmation received!
2. turbo2point2 L-body - Confirmation received!
3. jcronk23 - G Body - Confirmation received!
4. ajakeski - Minivan/Auto (need to discuss/check length) - Confirmation received!
5. Pat - L body - Confirmation received!
6. eairgood - L body - Confirmation received!
7. wheming - Minivan/Auto - Confirmation received! (pending price)
8. 2.2mopar - L - 2 sets - Confirmation received!
9. Pat (for Barry Miles) - G body - Confirmation received!
10. CornflakesGLHT (Pascal Labelle) - Lbody - 568 w/quaife - Confirmation received!
11. morrispower - Minivan/stick (measurements - how about now? LOL) - Confirmation received!
12. csxtra - P body - Confirmation received!
13. nvysion - P body w/ 1992 A568 (PM sent for infos) - Confirmation received!
14. Cobrat93 - L body - L5 - A555 - Confirmation received!
15. Microreo - J Body Auto - Confirmation received!
JT
SDAC Director
SDAC-Chicago President
JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
87 Shelby Z - 10.50@141.66mph
87 CSX #751 Clone - 12.88@102.88mph
www.badassperformance.com
Check out Turbo-Mopar Times!
Submit your 1/4 mile times HERE!!
Support SDAC! Join Today!
"I'm not some pro athlete with a bajillion dollars, I'm just an every man"
Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.
Does anyone have good condition OEM 1989-1990 unequal length minivan axles? Please email me jt@sdac.org
JT
SDAC Director
SDAC-Chicago President
JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
87 Shelby Z - 10.50@141.66mph
87 CSX #751 Clone - 12.88@102.88mph
www.badassperformance.com
Check out Turbo-Mopar Times!
Submit your 1/4 mile times HERE!!
Support SDAC! Join Today!
"I'm not some pro athlete with a bajillion dollars, I'm just an every man"
Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.
These are the last ones i bought for Mini. The pass side is on now.
I had some other new ones before this, and can't find the receipt.
These I believe said that they were a bit longer to compensate for motor mount wear. But, I didn't remember that when i bought them, since i knew i had good poly engine/trans mounts.
I have the old one that was just removed, and could get measurements off of it. Just don't know where you want measured, and how to compess into the cup and take a pic! I think i'll be short a few arms!
Wayne H.
'91 Dodge Spirit ES 2.5L turbo 5spd
'05 PT GT 2.4T HO autostick (RIP)
'89 Plymouth Acclaim 2.5L turbo auto, "Slugmobile" yes, THE Slugmobile!
'89 Dodge Caravan SE 2.5L turbo auto, "Mean Mini" yes, Gus' Mean Mini! (Current best 11.699 @ 114.43 mph! - Oct 15th, 2022 Cecil County Dragway, MD)
MeanMini dragracing videos: https://www.youtube.com/playlist?lis...URZLB1RxGYF6vw
and other cars, trucks and motorcycles
https://www.youtube.com/user/SlugmobileMeanMini