Page 1 of 2 12 LastLast
Results 1 to 20 of 21

Thread: Shelby Lancer part out

  1. #1
    Hybrid booster
    Join Date
    Feb 2007
    Location
    Findlay Ohio
    Posts
    473

    Shelby Lancer part out

    Date: 12th November 2014
    Username: kuzman83
    Full Name: John Kuznicki
    City, State, Zip: Findlay Ohio 45840
    Contact: jkuznic@gmail.com PM or email for Phone number
    Price: As noted in parts list, negotiable, shipping not included

    Unfortunately it is time for another Shelby Lancer to hit the big junk yard in the sky. The car is complete other than the DEX, 1 center cap medallion and the dash plaque. It has too much Ohio DOT body modification to be repaired at this point (rust so bad you can see the pedals and check your tire pressure at the same time). As much as this pains me to see another one bite the dust, it is my goal to salvage as many usable parts as possible to help myself and others keep their cars on the road. I WILL have photos loaded tomorrow with my username in the shot. I will not have pictures of everything so if you are in need of pics of a specific part please PM or email me and I will get those to you. I will try to be as comprehensive as possible with the parts list but since this is an entire vehicle part out I'm sure I'll forget items, if you don't see it just ask. Car is a 5 speed/cloth option with 178xxx miles. It seems to have a blown head gasket and is only running on 3 cylinders right now.

    Parts:

    2 piece TII intake with injectors, fuel rail, regulator and TB $225
    Shelby multi-piece gasket valve cover, no cracks $200
    TII engine harness $75
    TII Shelby logic module $100
    IC/Rad combo $75 (can have pressure checked upon request but when I fired it up I did not see any leaks)
    TII turbo core $100 (could be good, I bought the car for parts and haven't driven it so I'm not sure)
    TII long block w/178xxx miles no knocks, haven't been in it so I can't attest to it's condition. $100
    TII fast burn head unknown condition. Comes with cam and followers $75
    TII IC lower and upper hoses $60
    Mobile 1 under hood plaque, decent condition, will send pics upon request $40
    Fox head fog lights, no covers, decent condition $50 for the pair. Pending
    Shelby trunk/hatch medallion $100
    SL ground effects, lip spoiler has damage at the wheel wells, side skirts are rough but have hardware, rear is in good condition pics upon request $200 for the set
    SL black belt line moulding $10/piece
    Rear view mirrors $20 ea
    Shelby Steering wheel, weather cracked pretty bad but no chunks missing $150
    Shelby horn button, don't know if it works as the horns are tested not functioning. I will confirm functionality of the button before I post a price but I wanted to make it aware that it is for sale
    Dash with harness, gauges and trim pieces not included $40
    Door panels $20/ea
    WELL loved seats $50 for the set
    A-520555 shifter assy. with cables, missing shift knob pattern piece $75
    brake/clutch assy with cables $50
    A-520 core (again could be fine, I haven't driven the car) $150
    A-520/555 cv shafts, good boots $15 ea.
    K frame with bobble strut mount $40
    Window switches $5 ea.
    Lock switches $5 ea.
    Bumper covers front or rear $20 ea.
    SL hood with very good condition CS vacuum line sticker and under hood padding $50
    Overhead compass temp console $25
    Doors $25 each
    Hatch with glass and surface rust $20
    gauge cluster/dash bezel $40
    headlight switch $10
    Pioneer rear speaker grilles with pioneer emblem on both $50
    Glove box $15




    I will add more parts as I remember them. Feel free to ask if you don't see something and I can look to see if it's broken/missing or still there. As stated above prices are negotiable so if you don't like what you see feel free to make an offer

    Thanks,
    John
    Last edited by kuzman83; 12-12-2014 at 02:25 PM. Reason: edited parts list

  2. #2
    boostaholic
    Join Date
    Dec 2012
    Location
    Houston
    Posts
    1,265

    Re: Shelby Lancer part out

    how about the rear seat latches to release the seat backs? Need both! Door surrounds around the door handles on the interior...and a shipping price on the exhaust to 77381

  3. #3
    Garrett booster Turbo Mopar Contributor
    Join Date
    Nov 2013
    Location
    Gulf Coast, MS
    Posts
    131

    Re: Shelby Lancer part out

    Pic of two-piece please and overhead display.
    Thanks, M

  4. #4
    turbo addict looneytuner's Avatar
    Join Date
    Dec 2005
    Location
    Maryland Heights, Mo. St. Loui
    Posts
    1,582

    Re: Shelby Lancer part out

    SL grille and headlight bezels $50 for the set \
    Headlight retention assemblies $25 for both
    Distributor with HEP and cap $20
    Shipped to 63043
    PM total price with shipping and Paypal?

    You might want to mention the parts also fit the GTS
    Your prices are very fair.

  5. #5
    Garrett booster
    Join Date
    Feb 2006
    Location
    Fayette City, PA
    Posts
    140

    Re: Shelby Lancer part out

    I'll buy all 4 door panels as long as their in decent shape. I'll look tonight and see if there is anything else too. Thanks

  6. #6
    Moderator Turbo Mopar Staff Vigo's Avatar
    Join Date
    Feb 2006
    Location
    San Antonio,TX
    Posts
    10,798

    Re: Shelby Lancer part out

    Sent you a PM.

    Dont push the red button.You hear me?

  7. #7
    Supporting Member II Turbo Mopar Contributor ajakeski's Avatar
    Join Date
    Sep 2007
    Location
    SE Wisconsin
    Posts
    2,624

    Re: Shelby Lancer part out

    PM sent

  8. #8
    Hybrid booster
    Join Date
    Dec 2008
    Location
    United States
    Posts
    857

    Re: Shelby Lancer part out

    PM sent (seats)

  9. #9
    Hybrid booster
    Join Date
    Feb 2007
    Location
    Findlay Ohio
    Posts
    473

    Re: Shelby Lancer part out

    To all inquiries. I am doing my best to get pictures and shipping quotes as requested. If I don't have them PM'd or emailed to you tonight you will hear from me by no later than tomorrow. I appreciate the interest!

  10. #10
    Hybrid booster
    Join Date
    May 2009
    Location
    Triangle, VA
    Posts
    362

    Re: Shelby Lancer part out

    I'd like the horn button, but didn't see a price listed above.

  11. #11

    Re: Shelby Lancer part out

    I need the black storage holder ( above the ash tray & below the radio ) held on by four torx screws. Usually the spring breaks and lid won't stay closed.

    Thanks

  12. #12

    Re: Shelby Lancer part out

    If the half shafts (2) and intermediate drive shaft (1) have not been taken and are in good shape, I will take all three. Shipping to 38049.
    [SIZE="3"] [B]Jon Trotter[/B][/SIZE] [B]1985[/B] Dodge Shelby Charger, Currently decommissioned [B]1987[/B] Shelby GLHS, #937 [B]1987[/B] Shelby Lancer, #628 [QUOTE=Reeves;587010]I can be ready. Please send pics of wife. _____DodgeZ add comments here______[/QUOTE]

  13. #13
    boostaholic
    Join Date
    Jan 2007
    Location
    Pittsburgh Area
    Posts
    1,171

    Re: Shelby Lancer part out

    I'll take the foglights.
    -Jim Too many cars, not enough time..

  14. #14
    Hybrid booster
    Join Date
    Feb 2007
    Location
    Findlay Ohio
    Posts
    473

    Re: Shelby Lancer part out

    Quote Originally Posted by dodgeman87 View Post
    I need the black storage holder ( above the ash tray & below the radio ) held on by four torx screws. Usually the spring breaks and lid won't stay closed.

    Thanks
    Unfortunately the cubby door is broken on this one as well.

    Quote Originally Posted by minigts View Post
    If the half shafts (2) and intermediate drive shaft (1) have not been taken and are in good shape, I will take all three. Shipping to 38049.
    No one has asked about these yet, I will PM you a shipping quote tomorrow after I take some measurements and weigh the parts.

    Quote Originally Posted by jl93sundance View Post
    I'll take the foglights.
    Not a problem, if you could pm me your zip for a shipping quote that would be great!


    Thanks everyone for your inquiries! I am working to get back with everyone as quickly as possible.

  15. #15
    Hybrid booster
    Join Date
    Feb 2007
    Location
    Findlay Ohio
    Posts
    473

    Re: Shelby Lancer part out

    UPDATE: Everyone that has paid for parts will be receiving tracking numbers tomorrow. I will be responding to PM's tonight and tomorrow for all other inquiries. Still plenty of parts available. I have been slammed at work this week which is causing the delays in PM responses. I appreciate everyone's patience.

    Thanks!

  16. #16
    turbo addict
    Join Date
    Dec 2005
    Location
    Spokane, Wa
    Posts
    9,046

    Re: Shelby Lancer part out

    I need the cowl cover. Please read my post about removal here: Must be in good shape with no cracked fins.

    http://www.turbo-mopar.com/forums/sh...35#post1063135

  17. #17
    Hybrid booster
    Join Date
    Feb 2007
    Location
    Findlay Ohio
    Posts
    473

    Re: Shelby Lancer part out

    Cowl cover was already removed improperly, all the hold downs are snapped off. Sorry!

  18. #18
    turbo addict
    Join Date
    Dec 2005
    Location
    Spokane, Wa
    Posts
    9,046

    Re: Shelby Lancer part out

    that's ok, thanks for checking.

  19. #19
    Hybrid booster
    Join Date
    Feb 2007
    Location
    Findlay Ohio
    Posts
    473

    Re: Shelby Lancer part out

    Plenty of parts still available. Feel free to make offers!

  20. #20
    Super Moderator Turbo Mopar Staff contraption22's Avatar
    Join Date
    Dec 2005
    Location
    Havertown, PA
    Posts
    9,517

    Re: Shelby Lancer part out

    Didn't see the ground effects listed. If available, price shipped to 19083?
    Mike Marra
    1986 Plymouth Horizon GLMF "The Contraption" < entertaining sponsorship offers
    Project Log:
    http://www.turbo-mopar.com/forums/showthread.php?69708-The-Contraption-2013-14&highlight=

Page 1 of 2 12 LastLast

Similar Threads

  1. Replies: 24
    Last Post: 11-25-2013, 11:52 PM
  2. General WTB 1987/88 Shelby Lancer/ Lebaron GTS / Lancer shelby parts
    By BrnNMony in forum Parts Wanted
    Replies: 2
    Last Post: 09-18-2013, 04:10 PM
  3. PART II- Lancer Shelby vs SC Harley F150
    By svodave in forum Strip & Street Stories
    Replies: 6
    Last Post: 11-19-2012, 06:39 PM
  4. General Shelby Lancer/Lancer Shelby hatches + misc
    By speeddemon in forum Parts For Sale
    Replies: 10
    Last Post: 10-09-2011, 02:15 PM
  5. Electronics Shelby Lancer Fog Lights, Shelby Lancer/Lancer/Lebaron GTS 12 Button Navigator
    By 1983Rampage in forum Parts For Sale
    Replies: 8
    Last Post: 02-10-2009, 09:51 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •