Results 1 to 10 of 10

Thread: FS: Exhaust and Transmission bits and pieces, some SRT-4 stuff

  1. #1
    Supporting Member Turbo Mopar Contributor jonnymopar's Avatar
    Join Date
    Feb 2009
    Location
    Southeastern MA
    Posts
    780

    FS: Exhaust and Transmission bits and pieces, some SRT-4 stuff

    Date: 14th October 2014
    Username: jonnymopar
    Full Name: Jon Joubert
    City, State, Zip: MA
    Contact: PM me on here


    Turbos Unleashed 6-puck disk for small-spline trans - $70 shipped
    Has about 2500 miles on it, no track passes, perfect condition. I decided to go with a solid hub disc. I got this as part of a yellow (now gold) plate combo. This may work with other plates as well, not sure. Again, this is for any small-spline trans.







    Moroso Spiral-Flow Muffler new in box - $60 shipped
    Bought it earlier this year, but not going to use it. Just trying to get something back for it.





    Modern Performance CHQ 3" stainless downpipe new in box - $60 shipped
    Same thing, bought it earlier this year and decided not to use it. Welds are actually decent for an inexpensive part. Read more about it here: http://www.modernperformance.com/pro...usingdownpipes





    1995-2002 Stratus/Breeze/Cirrus DOHC exhaust manifold - $25 shipped
    Use it for an N/A build I guess?



    Vibrant strut tower brace for 2nd gen Neon and SRT-4 - $30
    Let me know your zip code and I'll figure out shipping. This is their first revision of the design. If you search around you'll see this solid aluminum version and also a version with three holes near the center of the bar.

    Last edited by jonnymopar; 10-21-2014 at 09:51 AM.
    Jon J.

    1989 Daytona ES 2.4L DOHC
    2003 Neon SXT - gone but never forgotten

    If it ain't broke, fix it 'till it is!

  2. #2
    Moderator Turbo Mopar Staff Vigo's Avatar
    Join Date
    Feb 2006
    Location
    San Antonio,TX
    Posts
    10,798

    Re: FS: Exhaust and Transmission bits and pieces, some SRT-4 stuff

    Damn, if id seen this a week ago i definitely wouldnt have paid $30 for a flex section to weld into my existing 3" non-stainless downpipe on my srt van. Oh well. Good luck with sale!

    Dont push the red button.You hear me?

  3. #3
    Hybrid booster
    Join Date
    Jan 2013
    Location
    Spartanburg SC
    Posts
    301

    Re: FS: Exhaust and Transmission bits and pieces, some SRT-4 stuff

    Would the disc work on a 89 520 na trans?

  4. #4
    Supporting Member Turbo Mopar Contributor jonnymopar's Avatar
    Join Date
    Feb 2009
    Location
    Southeastern MA
    Posts
    780

    Re: FS: Exhaust and Transmission bits and pieces, some SRT-4 stuff

    Quote Originally Posted by jayspartanburg View Post
    Would the disc work on a 89 520 na trans?
    Sure would. The 555 that I briefly used it on is an 89 as well. I believe they changed the input shaft size in 1991, so anything before that should work.
    Jon J.

    1989 Daytona ES 2.4L DOHC
    2003 Neon SXT - gone but never forgotten

    If it ain't broke, fix it 'till it is!

  5. #5
    Hybrid booster
    Join Date
    Jan 2013
    Location
    Spartanburg SC
    Posts
    301

    Re: FS: Exhaust and Transmission bits and pieces, some SRT-4 stuff

    Pm sent
    Last edited by jayspartanburg; 10-15-2014 at 10:04 AM.

  6. #6
    Hybrid booster
    Join Date
    Jan 2013
    Location
    Spartanburg SC
    Posts
    301

    Re: FS: Exhaust and Transmission bits and pieces, some SRT-4 stuff

    Sent another pm

  7. #7
    Supporting Member II Turbo Mopar Contributor ajakeski's Avatar
    Join Date
    Sep 2007
    Location
    SE Wisconsin
    Posts
    2,624

    Re: FS: Exhaust and Transmission bits and pieces, some SRT-4 stuff

    PM Sent

  8. #8
    Supporting Member Turbo Mopar Contributor jonnymopar's Avatar
    Join Date
    Feb 2009
    Location
    Southeastern MA
    Posts
    780

    Re: FS: Exhaust and Transmission bits and pieces, some SRT-4 stuff

    PM's returned.
    Jon J.

    1989 Daytona ES 2.4L DOHC
    2003 Neon SXT - gone but never forgotten

    If it ain't broke, fix it 'till it is!

  9. #9
    Supporting Member Turbo Mopar Contributor jonnymopar's Avatar
    Join Date
    Feb 2009
    Location
    Southeastern MA
    Posts
    780

    Re: FS: Exhaust and Transmission bits and pieces, some SRT-4 stuff

    PMs once again returned. I've had some questions about the Turbo Unleashed disc. As soon as I get a chance, I'll measure the thickness of the pads and post it. I don't really have any way to verify whether it will work with anything other than a TU plate or not. It might. The TU clutches were tweaked for drivability improvements (and believe me, it shows), but I'm not sure about the discs. I figured that there are enough people on here using those clutches who might be able to use a very-low-mileage spare disc. But I can not say for sure what else it will work with.
    Jon J.

    1989 Daytona ES 2.4L DOHC
    2003 Neon SXT - gone but never forgotten

    If it ain't broke, fix it 'till it is!

  10. #10
    Supporting Member Turbo Mopar Contributor jonnymopar's Avatar
    Join Date
    Feb 2009
    Location
    Southeastern MA
    Posts
    780

    Re: FS: Exhaust and Transmission bits and pieces, some SRT-4 stuff

    Differential and shifter are gone. Strut tower bar is probably gone.

    Also:




    ...in case anyone is wondering. I don't know if anybody has a spare stock T2 disc that they can measure to compare.
    Last edited by jonnymopar; 10-21-2014 at 09:50 AM.
    Jon J.

    1989 Daytona ES 2.4L DOHC
    2003 Neon SXT - gone but never forgotten

    If it ain't broke, fix it 'till it is!

Similar Threads

  1. Transmission Transmission Parts For Sale. Tons of Stick parts & some automatic stuff too.
    By Cliff Ramsdell in forum Parts For Sale
    Replies: 6
    Last Post: 07-23-2013, 05:38 AM
  2. Transmission Manual transmission swap stuff... all of it.
    By Big_P in forum Parts Wanted
    Replies: 13
    Last Post: 10-04-2011, 07:59 AM
  3. General All of my 8V stuff, big power pieces...
    By 8valves in forum Parts For Sale
    Replies: 53
    Last Post: 01-17-2010, 10:46 PM
  4. Replies: 6
    Last Post: 08-21-2008, 01:06 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •