This is my new 3 bar map sensor setup. You can order these at your local dodge dealer for less than 30 bucks last I checked. They were used on srt4 calibers.
They come out of the box with quarter turn locking lugs, I filed these lugs off in about 30 sec. I then ran the end of tge sensor through a 1/8in npt die.
The only pipe barb I had laying around was 1/4 in npt so I used an adapter
And finally, here is the part number. I will get a connector number shortly. Unfortunately the mopar connector is more expensive than the sensor. Ill try to source a cheaper alternative.