I'm running a BB flashable SMEC, tuning is going fairly well but I have an interesting problem.
If I stab the throttle and hold it, it will only boost to about 7-8 psi. If I ease into it, it will hit 16psi ( where it's set )
So far I've tried changing all of the boost parameters to the same number thinking that it was possibly the
FromRPM,FromSpeed,FromTemp,FromThrottle are ALL set to the same value and are flat across the board for testing.
TPS voltage is a little on the low side ( 3.6v at WOT ) but I'm not thinking it's the TPS because it didn't do this with the original ECU or the new ECU with the original program flashed to it.
Point me in the right direction.