I am planning my build for this winter and on the chopping block is my 30 psi boost gauge, with my goals for next year, 30 psi will not be high enough. I have been runing turbonator tunes all summer and have my car pretty dialed in on Premium, but next year I plan to switch to E85 and turn the boost up so I need a gauge that will go higher and I will also need something more than a 3 bar Map sensor. So in my research I came across this:
http://www.innovatemotorsports.com/x...5&cat=0&page=1
This looks like a nice gauge and wiould compliment my Innovate MTX-L Wideband gauge. This gauge comes with a 4 bar map sensor. I am going to email Innovate to find out who's sensor it is that they are using. It would be really nice if I could tap into the 4 bar wires of the gauge's sensor and use them for a signal for the ECU. I can also daisy-chain this gauge with my WBO2 and have data logging on both gauges overlayed.
What is people's opinion about running a digital boost gauge? Are they eay to read while driving. I have only had a mechanical boost gaue so far, but my digital WBO2 is really easy to read.