Page 2 of 3 FirstFirst 123 LastLast
Results 21 to 40 of 45

Thread: Should TU reproduce 005 and 006 style MP head gaskets?

  1. #21
    Hybrid booster
    Join Date
    Apr 2010
    Location
    eagleville pa
    Posts
    845

    Re: Should TU reproduce 005 and 006 style MP head gaskets?

    i'd be down for at least 5 gaskets

  2. #22
    Super Moderator Turbo Mopar Staff 135sohc's Avatar
    Join Date
    Aug 2008
    Location
    SoMd
    Posts
    6,178

    Re: Should TU reproduce 005 and 006 style MP head gaskets?

    Quote Originally Posted by Vigo View Post
    I dont care if they make more or not. Pat ran 11s on a new-style Felpro gasket without realizing it, if i remember correctly. Good enough.
    I think it would be fair to say he is a cut above just about everyone here in attention to detail and achieving repeatable success because of it. You can make cork valve cover gaskets not leak if you try hard enough….

  3. #23
    Rhymes with tortoise. Turbo Mopar Staff cordes's Avatar
    Join Date
    Dec 2005
    Location
    Tuscola, IL
    Posts
    21,441

    Re: Should TU reproduce 005 and 006 style MP head gaskets?

    Quote Originally Posted by 135sohc View Post
    I think it would be fair to say he is a cut above just about everyone here in attention to detail and achieving repeatable success because of it. You can make cork valve cover gaskets not leak if you try hard enough….
    All respect due to Pat, he's not the only one to have success with the new style gasket.

  4. #24
    turbo addict
    Join Date
    Jan 2008
    Location
    Squamish BC
    Posts
    3,618

    Re: Should TU reproduce 005 and 006 style MP head gaskets?

    i would down for 5 006

  5. #25

    Re: Should TU reproduce 005 and 006 style MP head gaskets?

    Guess this idea is a bust.

  6. #26
    turbo addict
    Join Date
    Jan 2006
    Location
    Coos Bay, Oregon
    Posts
    5,439

    Re: Should TU reproduce 005 and 006 style MP head gaskets?

    Does Chrysler still sell the non-mopar performance one?
    Great stuff for great cars! Poly engine mounts and bushings at: http://www.polybushings.com

  7. #27
    Hybrid booster
    Join Date
    Oct 2011
    Location
    France
    Posts
    275

    Re: Should TU reproduce 005 and 006 style MP head gaskets?

    I'd take 5

  8. #28
    Super Moderator Turbo Mopar Staff 135sohc's Avatar
    Join Date
    Aug 2008
    Location
    SoMd
    Posts
    6,178

    Re: Should TU reproduce 005 and 006 style MP head gaskets?

    Quote Originally Posted by Johnny View Post
    Does Chrysler still sell the non-mopar performance one?
    The regular and MP gaskets were the same gaskets but sold under different part numbers for warranty purposes. I purchased two regular gaskets and they were both marked as discontinued. The same gaskets purchased 3 years ago and there were plenty with no warning of impending cancellation. After the 005 was cancelled everyone rushed and bought the regular part number so its now gone.

  9. #29
    boostaholic
    Join Date
    Jan 2007
    Location
    Pittsburgh Area
    Posts
    1,171

    Re: Should TU reproduce 005 and 006 style MP head gaskets?

    I just looked up the 006 gasket today at work. There is a new superceded part number that ends in ab...They aren't available yet, but my guess is they will be available for purchase in the near future.
    -Jim Too many cars, not enough time..

  10. #30
    Supporting Member Turbo Mopar Contributor supercrackerbox's Avatar
    Join Date
    Dec 2005
    Location
    Firth, Nebraska
    Posts
    5,022

    Re: Should TU reproduce 005 and 006 style MP head gaskets?

    Keep us posted on that!

  11. #31
    turbo addict
    Join Date
    Jan 2006
    Location
    Coos Bay, Oregon
    Posts
    5,439

    Re: Should TU reproduce 005 and 006 style MP head gaskets?

    5281065 is a gasket from Mopar that will work. But not that many out there.
    Great stuff for great cars! Poly engine mounts and bushings at: http://www.polybushings.com

  12. #32
    turbo addict
    Join Date
    Jan 2006
    Location
    Coos Bay, Oregon
    Posts
    5,439

    Re: Should TU reproduce 005 and 006 style MP head gaskets?

    I talked to Ed Peters and he told me he thinks the Cometic ones are the best.
    Just a little pricy but just about like having a o-ringed system.
    The part number (I think) is C5734-066

    The -066 is the thickness of the gasket.
    Last edited by Johnny; 09-26-2014 at 04:27 PM.
    Great stuff for great cars! Poly engine mounts and bushings at: http://www.polybushings.com

  13. #33
    turbo addict JDAWG's Avatar
    Join Date
    Dec 2005
    Location
    Hagerstown, Maryland, United S
    Posts
    2,494

    Re: Should TU reproduce 005 and 006 style MP head gaskets?

    P4452006 supercedes to P4452006AB, first time i have ever seen this, but you can ONLY put a special handling order in on them, it isn't discontinued, and it is not priced, 41 sitting on order right now, no eta of course. Looks to me like Chrysler is waiting to see if enough pop up on order and they will get a batch, but again there is no pricing, that will probably depend on how many are ordered from the supplier, if any at all. The 005 is gone though. But looks like there is an 'inside' guy still left at Chrysler thinking about you guys lol.


    So go down to your local dealer and get your name on a few and looks like they are getting a batch in if they get enough orders

  14. #34
    turbo addict Chris W's Avatar
    Join Date
    Dec 2005
    Location
    Phoenix, Arizona
    Posts
    2,764

    Re: Should TU reproduce 005 and 006 style MP head gaskets?

    Quote Originally Posted by Johnny View Post
    I talked to Ed Peters and he told me he thinks the Cometic ones are the best.
    Just a little pricy but just about like having a o-ringed system.
    The part number (I think) is C5734-066

    The -066 is the thickness of the gasket.
    They are the best sealing but both head and block deck must be surfaced to the proper RA in order for this to happen. It's alot of extra work if you weren't planning on pulling the motor.

    Chris-TU
    Chris Wright www.TurbosUnleashed.com Chris@TurbosUnleashed.com 602-76-BOOST Tech/Sales#: Monday-Saturday 9AM-7PM MST Proudly Serving the Turbo-Mopar Community since 1997 TU is a performance, not marketing company. We provide accurate performance data on all our performance products. Fabricating data to make us appear better is just not our style. Do the research before you buy. ROCK BOTTOM PRICES WITHOUT THE HIDDEN HANDLING FEES.... -----HOME OF THE 9 SECOND FWD T-M CLUTCH-----

  15. #35
    turbo addict JDAWG's Avatar
    Join Date
    Dec 2005
    Location
    Hagerstown, Maryland, United S
    Posts
    2,494

    Re: Should TU reproduce 005 and 006 style MP head gaskets?

    Oh sorry Chris didn't realize this was in your forum, I'm on tapatalk and just clicked new posts, remove if need be, just trying to help out, sorry again

  16. #36
    turbo addict Chris W's Avatar
    Join Date
    Dec 2005
    Location
    Phoenix, Arizona
    Posts
    2,764

    Re: Should TU reproduce 005 and 006 style MP head gaskets?

    Quote Originally Posted by JDAWG View Post
    Oh sorry Chris didn't realize this was in your forum, I'm on tapatalk and just clicked new posts, remove if need be, just trying to help out, sorry again
    Not a problem. We already had the replacements on order so will add to our site and let everyone know when they are available to ship.

    Chris-TU
    Chris Wright www.TurbosUnleashed.com Chris@TurbosUnleashed.com 602-76-BOOST Tech/Sales#: Monday-Saturday 9AM-7PM MST Proudly Serving the Turbo-Mopar Community since 1997 TU is a performance, not marketing company. We provide accurate performance data on all our performance products. Fabricating data to make us appear better is just not our style. Do the research before you buy. ROCK BOTTOM PRICES WITHOUT THE HIDDEN HANDLING FEES.... -----HOME OF THE 9 SECOND FWD T-M CLUTCH-----

  17. #37
    The moderately moderate moderator Turbo Mopar Staff
    Join Date
    Dec 2006
    Location
    Akron, Ohio
    Posts
    6,870

    Re: Should TU reproduce 005 and 006 style MP head gaskets?

    I only have the one car, but I would be in for 3-4 gaskets. I like having extras laying around.
    Bryan
    86 GLHS #161, 2016 Impala
    SDAC National Member, SDAC Buckeye Chapter Member

    A man has got to know his limitations.....

  18. #38
    Hybrid booster
    Join Date
    Sep 2008
    Location
    Winnipeg, MB, Canada
    Posts
    612

    Re: Should TU reproduce 005 and 006 style MP head gaskets?

    If this goes through I would be down for 3-4 gaskets.

  19. #39

    Re: Should TU reproduce 005 and 006 style MP head gaskets?

    Seems to have died. No wheres near enough

  20. #40
    Garrett booster Turbo Mopar Contributor
    Join Date
    Nov 2013
    Location
    Gulf Coast, MS
    Posts
    131

    Re: Should TU reproduce 005 and 006 style MP head gaskets?

    You can put me down for two 006...I'll help the cause!!

Page 2 of 3 FirstFirst 123 LastLast

Similar Threads

  1. Its official, we are screwed for head gaskets!
    By turbovanman² in forum Engine - Block, Piston, Heads, Intakes
    Replies: 69
    Last Post: 11-11-2014, 03:06 AM
  2. General 005 Head Gasket, 302 Head Gaskets, Service Manuals
    By DetroitTurbo in forum Parts For Sale
    Replies: 0
    Last Post: 04-19-2013, 11:06 AM
  3. two head gaskets?
    By LeBaronMike in forum Engine - Block, Piston, Heads, Intakes
    Replies: 7
    Last Post: 11-08-2012, 04:47 PM
  4. Mopar head gaskets
    By kwiksilver in forum Engine - Block, Piston, Heads, Intakes
    Replies: 5
    Last Post: 07-03-2009, 10:43 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •