i'd be down for at least 5 gaskets
i'd be down for at least 5 gaskets
i would down for 5 006
Guess this idea is a bust.
Does Chrysler still sell the non-mopar performance one?
Great stuff for great cars! Poly engine mounts and bushings at: http://www.polybushings.com
I'd take 5
The regular and MP gaskets were the same gaskets but sold under different part numbers for warranty purposes. I purchased two regular gaskets and they were both marked as discontinued. The same gaskets purchased 3 years ago and there were plenty with no warning of impending cancellation. After the 005 was cancelled everyone rushed and bought the regular part number so its now gone.
I just looked up the 006 gasket today at work. There is a new superceded part number that ends in ab...They aren't available yet, but my guess is they will be available for purchase in the near future.
-Jim Too many cars, not enough time..
Keep us posted on that!
5281065 is a gasket from Mopar that will work. But not that many out there.
Great stuff for great cars! Poly engine mounts and bushings at: http://www.polybushings.com
I talked to Ed Peters and he told me he thinks the Cometic ones are the best.
Just a little pricy but just about like having a o-ringed system.
The part number (I think) is C5734-066
The -066 is the thickness of the gasket.
Last edited by Johnny; 09-26-2014 at 04:27 PM.
Great stuff for great cars! Poly engine mounts and bushings at: http://www.polybushings.com
P4452006 supercedes to P4452006AB, first time i have ever seen this, but you can ONLY put a special handling order in on them, it isn't discontinued, and it is not priced, 41 sitting on order right now, no eta of course. Looks to me like Chrysler is waiting to see if enough pop up on order and they will get a batch, but again there is no pricing, that will probably depend on how many are ordered from the supplier, if any at all. The 005 is gone though. But looks like there is an 'inside' guy still left at Chrysler thinking about you guys lol.
So go down to your local dealer and get your name on a few and looks like they are getting a batch in if they get enough orders
Chris Wright www.TurbosUnleashed.com Chris@TurbosUnleashed.com 602-76-BOOST Tech/Sales#: Monday-Saturday 9AM-7PM MST Proudly Serving the Turbo-Mopar Community since 1997 TU is a performance, not marketing company. We provide accurate performance data on all our performance products. Fabricating data to make us appear better is just not our style. Do the research before you buy. ROCK BOTTOM PRICES WITHOUT THE HIDDEN HANDLING FEES.... -----HOME OF THE 9 SECOND FWD T-M CLUTCH-----
Oh sorry Chris didn't realize this was in your forum, I'm on tapatalk and just clicked new posts, remove if need be, just trying to help out, sorry again
Chris Wright www.TurbosUnleashed.com Chris@TurbosUnleashed.com 602-76-BOOST Tech/Sales#: Monday-Saturday 9AM-7PM MST Proudly Serving the Turbo-Mopar Community since 1997 TU is a performance, not marketing company. We provide accurate performance data on all our performance products. Fabricating data to make us appear better is just not our style. Do the research before you buy. ROCK BOTTOM PRICES WITHOUT THE HIDDEN HANDLING FEES.... -----HOME OF THE 9 SECOND FWD T-M CLUTCH-----
I only have the one car, but I would be in for 3-4 gaskets. I like having extras laying around.
Bryan
86 GLHS #161, 2016 Impala
SDAC National Member, SDAC Buckeye Chapter Member
A man has got to know his limitations.....
If this goes through I would be down for 3-4 gaskets.
Seems to have died. No wheres near enough
You can put me down for two 006...I'll help the cause!!