csx-t moldings

[663csx-t]

can anyone tell me what color the moldings should be
I am restoring my csx-t #663 and im not sure what color the moldings should be gray blue or what
my old ones are to faded to tell

[martin kolner]

they have a blue stripe

[663csx-t]

that's true
but im trying find out what color the molding it self is

- - - Updated - - -

that's true
but im trying find out what color the molding it self is

[martin kolner]

from the part 1988 book

1 4467 459 1 DECAL, W/Shield, "SHELBY"
2 4467 881 1 TAPE STRIPE, Hood Center
4467 882 1 TAPE STRIPE, Hood, Rt.
4467 883 1 Lt.
3 4467 880 1 DECAL, Grille, "CSX-T"
4 4467 461 1 TAPE STRIPE, Fascia Frt. and Rear, Blue
5 4467 452 1 AIR DAM, Frt.
6 4467 468-9 1 APPLIQUE, Side Sill Frt.
8 4467 466-7 1 APPLIQUE, Side Sill Rear
4467 465 AR RETAINER
9 4467 470-1 1 APPLIQUE, Door Lwr.
10 4467 878-9 1 TAPE STRIPE, Door, "SHELBY CSX-T"
4467 476-7 1 TAPE STRIPE, Fndr.
4467 480-1 1 TAPE STRIPE, Qtr. Pnl.
12 4467 451 1 AIR DAM, Rear
13 4467 453 1 MEDALLION, Rear Hatch
14 4467 884 1 DECAL, Rear Hatch, "CSX-T"
15 4467 885 1 TAPE STRIPE, Rear Spoiler
16 X490-1 FAZ 1 MOULDING, Fndr. Rear, Charcoal, Use Blue Tape Insert, See
Item 4
17 X496-7 FAZ 1 MOULDING, Door, Charcoal, Use Blue Tape Insert, See Item 4
18 X498-9 FAZ 1 MOULDING, Qtr. Frt., Charcoal, Use Blue Tape Insert, See Item
4

from the 1987 part book

1 4370 318-9 1 MOULDING PACKAGE, Fndr. Side Rear, Blue Insert
2 4370 320-1 1 MOULDING PACKAGE, Door, Blue Insert
3 4370 322-3 1 MOULDING PACKAGE, Qtr. Frt., Blue Insert
4 4467 468-9 1 SKIRT, Fndr. Side Rear Lwr.
5 4467 470-1 1 SKIRT, Door Lwr.
6 4467 466-7 1 SKIRT, Rear Lwr. Side
4467 465 AR RETAINER, Rear Skirt
7 4467 453 1 MEDALLION, Rear Hatch, Shelby
8 4467 458 1 TAPE STRIPE, Frt. Grille, "GSX"
9 4467 456 1 TAPE STRIPE, Hood, "INTERCOOLED"
10 4467 461 1 TAPE STRIPE, Fascia, Frt. and Rear
11 4467 459 1 TAPE STRIPE, W/Shield, "SHELBY"
12 4467 476-7 1 TAPE STRIPE, Fndr.
4467 478-9 1 TAPE STRIPE, Door
4467 480-1 1 TAPE STRIPE, Qtr. Pnl.
13 4467 457 1 TAPE STRIPE, Rear Hatch, "GSX"

the 87 shows the molding with the blue stripe insert and the 88 book shows you needed to buy the stripe and apply it

[663csx-t]

thanks ill look in to that

[4 l-bodies]

I got these #'s and names from Steve Kalmes who made #475 so nice. The bumper color is PPG DUB5013H. That is a PPG Delton basecoat #. Obviously cleared over that. The bumber filler strip (top of bumpers) what was used on my CSXT was SEM 15303 graphite. More of a satin sheen similer to SEM trim black. My side mouldings have not been restored but I planned on using the SEM 15303 on them when I do.
Todd

[martin kolner]

I actually have the moldings and the tape stripe NOS for them

[2manyturbos]

Todd, Thanks for the great info, very useful!
Martin, What is the cost for all 6 moldings 3 on right side and 3 on left?

[663csx-t]

thanks for the info I cant wait to have the car all done

[663csx-t]

does anyone think that the molding are the same color as the bottom part of the car
I have looked up paint codes and no luck
I have looked at some pics of other csx-t some look like thay are the same color of the bottom of the car
some don't what do you guys think

[4 l-bodies]

does anyone think that the molding are the same color as the bottom part of the car
I have looked up paint codes and no luck
I have looked at some pics of other csx-t some look like thay are the same color of the bottom of the car
some don't what do you guys think

On my CSXT 614 and Steve Kalmes old #475, the side molding was slightly darker than the bottom and bumpers. Like I said before, mine are original. Certainly not trim black but a bit darker than the bumpers and lower portion of car.
Todd

[663csx-t]

I got the paint today thanks guys