can anyone tell me what color the moldings should be
I am restoring my csx-t #663 and im not sure what color the moldings should be gray blue or what
my old ones are to faded to tell
can anyone tell me what color the moldings should be
I am restoring my csx-t #663 and im not sure what color the moldings should be gray blue or what
my old ones are to faded to tell
they have a blue stripe
that's true
but im trying find out what color the molding it self is
- - - Updated - - -
that's true
but im trying find out what color the molding it self is
from the part 1988 book
1 4467 459 1 DECAL, W/Shield, "SHELBY"
2 4467 881 1 TAPE STRIPE, Hood Center
4467 882 1 TAPE STRIPE, Hood, Rt.
4467 883 1 Lt.
3 4467 880 1 DECAL, Grille, "CSX-T"
4 4467 461 1 TAPE STRIPE, Fascia Frt. and Rear, Blue
5 4467 452 1 AIR DAM, Frt.
6 4467 468-9 1 APPLIQUE, Side Sill Frt.
8 4467 466-7 1 APPLIQUE, Side Sill Rear
4467 465 AR RETAINER
9 4467 470-1 1 APPLIQUE, Door Lwr.
10 4467 878-9 1 TAPE STRIPE, Door, "SHELBY CSX-T"
4467 476-7 1 TAPE STRIPE, Fndr.
4467 480-1 1 TAPE STRIPE, Qtr. Pnl.
12 4467 451 1 AIR DAM, Rear
13 4467 453 1 MEDALLION, Rear Hatch
14 4467 884 1 DECAL, Rear Hatch, "CSX-T"
15 4467 885 1 TAPE STRIPE, Rear Spoiler
16 X490-1 FAZ 1 MOULDING, Fndr. Rear, Charcoal, Use Blue Tape Insert, See
Item 4
17 X496-7 FAZ 1 MOULDING, Door, Charcoal, Use Blue Tape Insert, See Item 4
18 X498-9 FAZ 1 MOULDING, Qtr. Frt., Charcoal, Use Blue Tape Insert, See Item
4
from the 1987 part book
1 4370 318-9 1 MOULDING PACKAGE, Fndr. Side Rear, Blue Insert
2 4370 320-1 1 MOULDING PACKAGE, Door, Blue Insert
3 4370 322-3 1 MOULDING PACKAGE, Qtr. Frt., Blue Insert
4 4467 468-9 1 SKIRT, Fndr. Side Rear Lwr.
5 4467 470-1 1 SKIRT, Door Lwr.
6 4467 466-7 1 SKIRT, Rear Lwr. Side
4467 465 AR RETAINER, Rear Skirt
7 4467 453 1 MEDALLION, Rear Hatch, Shelby
8 4467 458 1 TAPE STRIPE, Frt. Grille, "GSX"
9 4467 456 1 TAPE STRIPE, Hood, "INTERCOOLED"
10 4467 461 1 TAPE STRIPE, Fascia, Frt. and Rear
11 4467 459 1 TAPE STRIPE, W/Shield, "SHELBY"
12 4467 476-7 1 TAPE STRIPE, Fndr.
4467 478-9 1 TAPE STRIPE, Door
4467 480-1 1 TAPE STRIPE, Qtr. Pnl.
13 4467 457 1 TAPE STRIPE, Rear Hatch, "GSX"
the 87 shows the molding with the blue stripe insert and the 88 book shows you needed to buy the stripe and apply it
thanks ill look in to that
I got these #'s and names from Steve Kalmes who made #475 so nice. The bumper color is PPG DUB5013H. That is a PPG Delton basecoat #. Obviously cleared over that. The bumber filler strip (top of bumpers) what was used on my CSXT was SEM 15303 graphite. More of a satin sheen similer to SEM trim black. My side mouldings have not been restored but I planned on using the SEM 15303 on them when I do.
Todd
I actually have the moldings and the tape stripe NOS for them
Todd, Thanks for the great info, very useful!
Martin, What is the cost for all 6 moldings 3 on right side and 3 on left?
thanks for the info I cant wait to have the car all done
does anyone think that the molding are the same color as the bottom part of the car
I have looked up paint codes and no luck
I have looked at some pics of other csx-t some look like thay are the same color of the bottom of the car
some don't what do you guys think
I got the paint today thanks guys