LWP manifold, need coolant neck??
Does anyone have one or need one? I cannot find the coolant neck for the one Wallace gave me, since this was a last ditch effort to save a f*cked up deal from Andre. Im so done looking at this POS. Would Brian's intake be a better option, since he can still be contacted?
Nick G. 1984 Dodge Rampage
Which engine is this intake for?
Mike Marra
1986 Plymouth Horizon GLMF "The Contraption" < entertaining sponsorship offers
Project Log:
http://www.turbo-mopar.com/forums/showthread.php?69708-The-Contraption-2013-14&highlight=
and is it something somebody could reproduce without changing the whole intake manifold or making your head explode?
Brent GREAT DEPRESSION RACING 1992 Duster 3.0T The Junkyard - MS II, OEM 10:1 -[I] Old - 11.5@125 22psi $90 [U]Stock[/U] 3.0 Junk Motor - 1 bar MAP [/I] 1994 Spirit 3.0T - 11.5@120 20 psi - Daily :eyebrows: Holset He351 -FT600 - 393whp 457ft/lb @18psi 1994 Spirit 3.0T a670 - He341, stock fuel, BEGI. Wife's into kid's project. 1990 Lebaron Coupe 2.2 TI/II non IC, a413 1990 Spirit 3.0 E.S. 41TE -- 1993 Spirit 3.0 E.S. 41TE -- 1994 Duster 3.0 A543 1981 Starlet KP61 Potential driver -- 1981 Starlet KP61 Parts -- 1983 Starlet KP61 Drag 2005 Durango Hemi Limited -- 1998 Dodge 12v 47re. AFC mods, No plate, Mack plug, Boost elbow -- 2011 Dodge 6.7 G56
Like I asked over on TD, I assume you are referring to the 2.4 SRT manifold he sold, which didnt have a coolant neck built in.
Not the 2.4. I have never owned a 2.4. This is for the 2.2 hybrid
http://thisideup.com/Hybrid/hybrid%2...Aug%202014.jpg
Nick G. 1984 Dodge Rampage
Mike may be my savior, going to pick up a chevy coolant neck tomorrow to test.
Nick G. 1984 Dodge Rampage
Yeah it sorta looks like a standard flange and bolt spacing, like even a 3.0 neck might fit. Is the hybrid intake basically the same but flipped TB location and coolant difference? My LWP intake for a 2.4 head is TB on the cam gear side and does not have any coverage for the head outlet
Brent GREAT DEPRESSION RACING 1992 Duster 3.0T The Junkyard - MS II, OEM 10:1 -[I] Old - 11.5@125 22psi $90 [U]Stock[/U] 3.0 Junk Motor - 1 bar MAP [/I] 1994 Spirit 3.0T - 11.5@120 20 psi - Daily :eyebrows: Holset He351 -FT600 - 393whp 457ft/lb @18psi 1994 Spirit 3.0T a670 - He341, stock fuel, BEGI. Wife's into kid's project. 1990 Lebaron Coupe 2.2 TI/II non IC, a413 1990 Spirit 3.0 E.S. 41TE -- 1993 Spirit 3.0 E.S. 41TE -- 1994 Duster 3.0 A543 1981 Starlet KP61 Potential driver -- 1981 Starlet KP61 Parts -- 1983 Starlet KP61 Drag 2005 Durango Hemi Limited -- 1998 Dodge 12v 47re. AFC mods, No plate, Mack plug, Boost elbow -- 2011 Dodge 6.7 G56
Its for the 2.0L neon head, I'm just putting it on a hybrid engine (or was). Drain holes in the block are plugged and decked, head has drain holes and fittings, and I have most of the cam dizzy parts.
Nick G. 1984 Dodge Rampage
No luck, the Chevy is 3.25" bolt to bolt oc, this is 2.265" oc. Can someone measure a fill neck for a 2.4 or anything laying around?
Nick G. 1984 Dodge Rampage
3.0 neck holes are too far apart.
Try having a parts store show you all their gaskets and then you could junkyard check for those that have the right bolt center.
Brent GREAT DEPRESSION RACING 1992 Duster 3.0T The Junkyard - MS II, OEM 10:1 -[I] Old - 11.5@125 22psi $90 [U]Stock[/U] 3.0 Junk Motor - 1 bar MAP [/I] 1994 Spirit 3.0T - 11.5@120 20 psi - Daily :eyebrows: Holset He351 -FT600 - 393whp 457ft/lb @18psi 1994 Spirit 3.0T a670 - He341, stock fuel, BEGI. Wife's into kid's project. 1990 Lebaron Coupe 2.2 TI/II non IC, a413 1990 Spirit 3.0 E.S. 41TE -- 1993 Spirit 3.0 E.S. 41TE -- 1994 Duster 3.0 A543 1981 Starlet KP61 Potential driver -- 1981 Starlet KP61 Parts -- 1983 Starlet KP61 Drag 2005 Durango Hemi Limited -- 1998 Dodge 12v 47re. AFC mods, No plate, Mack plug, Boost elbow -- 2011 Dodge 6.7 G56
Im gonna bring this stupid thing with me to the JY and go shopping. worst case I can throw it on the scale for scrap prices.
Nick G. 1984 Dodge Rampage
My 2.0 neon intake is a bout 2.5". SRT-4 is over 3".Originally Posted by Nemesismachine
Mike Marra
1986 Plymouth Horizon GLMF "The Contraption" < entertaining sponsorship offers
Project Log:
http://www.turbo-mopar.com/forums/showthread.php?69708-The-Contraption-2013-14&highlight=
I would hope you wouldn't scrap this thing over something as small as a neck, can you get another neck turn it 90 degrees and redrill for the new pattern? im sure a pt cruiser neck could fit? although I hate those leaky plastic things... im also trying to build a hybrid, I think im going with the caravan intake.
Found one, came off a 1998 DOHC neon.
Attachment 51588
Just need to work out the fuel rail fittings, should be set now though.
Nick G. 1984 Dodge Rampage
Posting Permissions
Reply With Quote
