I am finishing up my 2.4 swap and I ran into a problem. The TPS sensor plug hits the Neon DOHC intake runner. If I reverse the sensor, there is not enough room to plug it in. My 2.5 sensor has the plug parallel with the sensor, the Neon TPS is perpendicular. The perpendicular plug clears everything. My question is, can I use the neon sensor? I tested resistance with my MM and the middle and one conenctor are very close to my 2.5 sensor but the middle and other conenctor is different so I am guessing it will not work correctly. I took notice the 89 3.0 sensor has the plug in the same direction as the neon and uses the same plug as my 2.5 as does the TBI sensor. Does anyone know if the 3.0 or TBI sensor will interchange. I know the 3.0 should fit properly since it is the same TB but I am not sure about the resistance. Any info would be appreciated. Let me know if you threw a 3.0 TB on a 2.5 Turbo and used the 3.0 TPS.

Thanks!
Justin