I need to buy a helicoil kit for the intake manifold bolt holes on my 8V head. What size do I need to order? How about the valve cover bolt holes? I need to helicoil them too! Help!!
I need to buy a helicoil kit for the intake manifold bolt holes on my 8V head. What size do I need to order? How about the valve cover bolt holes? I need to helicoil them too! Help!!
[SIGPIC][/SIGPIC][FONT=Comic Sans MS]'91 Shadow convertible 2.5 auto, three core RP IC, S60/.48 stg 1, ported two-piece intake/52mm TB, Menegon +1 swirl, 88 turbo cam, Venolias, Crower rods, TU deep sump pan, ported exhaust, 3" from SV to TP, Hughes TC, Peloquin diff, DSS L5 driveshafts, Shelgame cal, Koni struts/shocks. [/FONT]
The manifold bolt holes are 8mm x 1.25 and I'm fairly certain the valve cover bolt holes are 6mm x 1.00.
[SIGPIC][/SIGPIC][FONT=Comic Sans MS]'91 Shadow convertible 2.5 auto, three core RP IC, S60/.48 stg 1, ported two-piece intake/52mm TB, Menegon +1 swirl, 88 turbo cam, Venolias, Crower rods, TU deep sump pan, ported exhaust, 3" from SV to TP, Hughes TC, Peloquin diff, DSS L5 driveshafts, Shelgame cal, Koni struts/shocks. [/FONT]
you're correct Jeremy
if your valve cover bolt holes are striped , you can fix it easy if you find som std thread small block or big block dodge valve cover bolts
if you tap them in like you were taping a thread , a little in a little back out , a little more back in etc then you can get the valve cover bolted down without even useing a tap wrench to cut the threads
you'll need sb or bb v c bolts for an aftermarket cast v c to do the corner ones but the standard sheetmetal cover's bolts will work fine for the front and back bolts
and they'll still look like dodge bolts
really IMO Heli-coils are the way to go. You shouldn't ever have any problems with them again if done right and you can use your factory bolts.
yeah I agree ^
but when you've just installed the v c and get a striped bolt & have no way to repair the thread - then my plan works
see I just take the VC off and heli-coil the hole that stripped.
1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
2004 GSW TDI, 5 speed, fully loaded, modified.
Aurora ignition wires for sale. Link to info
Super60 roller cams or custom/billet cams. Link to info