Shelby Dakota Performance 30HP Stage 2 Computer- rare

[shelbyconcepts]

Date: 01st August 2014
Username: shelbyconcepts
Full Name: Tim Costello
City, State, Zip: Shelby twp, Mi
Contact: shelbyconcepts@hotmail.com or PM
Price: $350

Description: Shelby Dakota Performance 30HP Stage 2 Computer- rare

* Requires 360 Throttle Body* Not included but can be found in any B-Van or Full size ram with a 360

To view, simply click on this link to go to the album:
http://imageevent.com/shelbyconcepts...?pa=computersd


***** FREE SHIPPING TO THE MOPAR NATS******

[cjbintx]

PM Sent.

Regards

[ShelGame]

I would love to copy that cal before you sell it. I can do it without having to open up the computer...

[cjbintx]

I would love for ShelGame to have a copy of the cal too.

[ajakeski]

PM sent

[shelbyconcepts]

Sale is pending....

[ajakeski]

I would love for ShelGame to have a copy of the cal too.

It would be great if this cal was in the Boost Button Library.

[shelbyconcepts]

Sold.....

[2.216VTurbo]

Sounds like someone in TX is building up a Nice Shelby Dakota It's gonna have a good cal and brand new wheel centers Those heads have a giant hump in the exhaust ports, you can grind out 90% of it without hitting anything

[cjbintx]

It would be great if ithis cal was in the Boost Button Library.

I hope to see it there soon also.

[cjbintx]

Sounds like someone in TX is building up a Nice Shelby Dakota It's gonna have a good cal and brand new wheel centers Those heads have a giant hump in the exhaust ports, you can grind out 90% of it without hitting anything

Yeah buuuuudy. Nothing better than bolt on ponies! Mine needs some TLC for sure, can tell it's been put to work. I uploaded some "as received" photos in a "before" album. Good info re: the heads, I'll remember that when I eventually pull the engine to do a full restore.

[ajakeski]

Sounds like someone in TX is building up a Nice Shelby Dakota It's gonna have a good cal and brand new wheel centers Those heads have a giant hump in the exhaust ports, you can grind out 90% of it without hitting anything

The Shelby Dakota 318 has the Mopar '302' head casting. This head has a closed combustion chamber, swirl ports and responds well to minor porting.
Lunati has several cams that work well in the roller 318.

The Mopar '308' head casting is the 1989 360 head. It has huge ports and the best exhaust flow numbers since the 1970's X heads.
This head also has swirl ports, but has the traditional Mopar V8 open combustion chamber. It will cause your compression to drop.

[The Pope]

the 308 heads with 1.88 intake valves flow the same as the x head with 2.02 valves, peak with more low lift flow. Then the exhaust is magnum and is 25 CFM roughly more total and a lot more at low lift, used as the MP Commando head 15 years ago.

The stage 2 computer as it is listed here is really not a stage computer at all. I bought one for my Shelby Dakota 1207. It is a bit more aggressive timing wise but the rev limiter sucks. Mopar after this kit dropped the factory replacement cal and replaced it with this cal. Being the 360 TBI uses the same injector as a 318 there is nothing special there either. When you get a TBI for a 3.9 it has a smaller injector in a 318 size TBI.

The "kit" had a Flowmaster 2.5" muffler, 360 TBI and the slightly more aggressive computer. Out of stupidity they tell you to grind the intake, just bolt on a 360 TBI intake. Both intakes are TERRIBLE! So I cut on a 6" x 6." x 1/4" aluminum plate to match the 360 TBI and the 4 barrel top of a Performer intake. The intake uses the early EGR and everything up front, AC compressor etc with the Performer. So big gain in flow and weight loss.

Moving on to Shelgame. You told me you got that cal from Jason years ago? Merkur boy read it long ago to make a copy. Hacking it for fuel and rev limit and temp control would be huge. Even if you use the Holley adjustable reg to level out closed loop the rev limiter still kills you bad. Also want mine to think it is at operating temp at 155 so I can run a cooler stat. Or to have one flashable for the pumping tables. The Shelby Dak would be something then lol.

[ajakeski]

Google helped me find this info about the Shelby Dakota performance kit on a Dakota Forum:

"1989 Shelby Dakota Performance Kit." P4529979. A minor correction: 20hp, 30lbs torque. It was a 360 throttle body, template to open the 318 intake for the throttle blade clearance, the 360 SMEC, and a low-restriction muffler (looks a lot like a flowmaster). That was it. No headers. It was a direct replacement that used all stock attachment hardware. The 360 computer was a performance version with fatter fuel curves and more advanced ignition spark curves, but I wouldn't sweat that.


Some Chrysler parts web sites show this part number for $700+
Most likely it's an old listing and no longer available.

[ShelGame]

Moving on to Shelgame. You told me you got that cal from Jason years ago? Merkur boy read it long ago to make a copy. Hacking it for fuel and rev limit and temp control would be huge. Even if you use the Holley adjustable reg to level out closed loop the rev limiter still kills you bad. Also want mine to think it is at operating temp at 155 so I can run a cooler stat. Or to have one flashable for the pumping tables. The Shelby Dak would be something then lol.

He did? I don't currently have that Cal ID in my collection. If I did, it would be posted here. The only V8 TBI cal I have is the '528. I have no idea the application for it.

[ajakeski]

'528 isn't on this list but I found info that shows it is a 1988 3.9 3 speed SMEC.

I sent you an '887 and a '937 today, you should have then early next week.

SINGLE MODULE ENG. CONTROL

4379542 318 Eng. Auto. Trans. 1988
4379887 (A998-999), A-727, 1989
4379889 318 Eng., A-500 Trans.
4379544 318 Eng. Man. Trans. 1988
4379937 360 Eng., Auto. Trans.
4379546 318 Eng. Auto. Trans. Calif. 1988
4379893 1989, A-500 Trans. Calif.
4379398 318 Eng. All Trans. Propane, 1988
4379891 1989, Auto. Trans., 318 Eng., Calif.
4379897 318 Eng. TBI, Calif. 1989
4379899 360 Eng. TBI, Auto. Trans. 1989
4379939 360 Eng. Auto. Trans. TBI, Calif. 1989
4379903 360 Eng. Man. Trans. TBI, 1989
4379895 318 Eng. Man. Trans. 1989
4379893 360 Eng. Auto. Trans. Calif. 1989
4379490 360 Eng. Man. Trans. Calif. 1989
4379923 360 Eng. Auto. Trans. Hev. Duty Cyc. 1989
4379923 360 Eng. Auto. Trans. Hev. Duty. Cyc. 1989
4379925 360 Eng. Man. Trans. Hev. Duty Cyc. 1989

[ajakeski]

List of TBI computers:

http://ramchargercentral.com/vehicle...cle-computers/

[ShelGame]

'528 isn't on this list but I found info that shows it is a 1988 3.9 3 speed SMEC.

I sent you an '887 and a '937 today, you should have then early next week.

SINGLE MODULE ENG. CONTROL

4379542 318 Eng. Auto. Trans. 1988
4379887 (A998-999), A-727, 1989
4379889 318 Eng., A-500 Trans.
4379544 318 Eng. Man. Trans. 1988
4379937 360 Eng., Auto. Trans.
4379546 318 Eng. Auto. Trans. Calif. 1988
4379893 1989, A-500 Trans. Calif.
4379398 318 Eng. All Trans. Propane, 1988
4379891 1989, Auto. Trans., 318 Eng., Calif.
4379897 318 Eng. TBI, Calif. 1989
4379899 360 Eng. TBI, Auto. Trans. 1989
4379939 360 Eng. Auto. Trans. TBI, Calif. 1989
4379903 360 Eng. Man. Trans. TBI, 1989
4379895 318 Eng. Man. Trans. 1989
4379893 360 Eng. Auto. Trans. Calif. 1989
4379490 360 Eng. Man. Trans. Calif. 1989
4379923 360 Eng. Auto. Trans. Hev. Duty Cyc. 1989
4379923 360 Eng. Auto. Trans. Hev. Duty. Cyc. 1989
4379925 360 Eng. Man. Trans. Hev. Duty Cyc. 1989

Thanks, got them yesterday. I'll copy those cals and post them later.

Oh yeah, thanks to Tim and the buyer, I was able to copy the Shelby Dakota cal this morning. PN 4517636 was on the outside of the ECU. Just looking at the cal now, it has the same PN in it.

I'll post all of the V6/V8 TBI cals that I have...

[ajakeski]

Thanks to everyone.

Faster Dakotas are in our future.

[cjbintx]

Thanks to everyone.

Faster Dakotas are in our future.

Woo hoo!!! Thanks all.