[SIGPIC][/SIGPIC][FONT=Comic Sans MS]'91 Shadow convertible 2.5 auto, three core RP IC, S60/.48 stg 1, ported two-piece intake/52mm TB, Menegon +1 swirl, 88 turbo cam, Venolias, Crower rods, TU deep sump pan, ported exhaust, 3" from SV to TP, Hughes TC, Peloquin diff, DSS L5 driveshafts, Shelgame cal, Koni struts/shocks. [/FONT]
Update: got the head off and the exhaust valve is missing about a fourth of the head. Cylinder and piston look fine. Nothing is beat up , even that chamber. Question, would it hurt to ball hone the cylinders again in the two that haven't seated yet from the rebuild?
[SIGPIC][/SIGPIC][FONT=Comic Sans MS]'91 Shadow convertible 2.5 auto, three core RP IC, S60/.48 stg 1, ported two-piece intake/52mm TB, Menegon +1 swirl, 88 turbo cam, Venolias, Crower rods, TU deep sump pan, ported exhaust, 3" from SV to TP, Hughes TC, Peloquin diff, DSS L5 driveshafts, Shelgame cal, Koni struts/shocks. [/FONT]
I just came down with the same problem on my recently rebuilt Omni GLH Turbo. Car overheated badly and now has zero compression on #2. I was about to start another thread, but this one serves as a pretty good roadmap on what to check next. I just hope it's not a broken piston.
a forth of the valve is missing you say? wonder its in the turbo or cat?
1988 Lancer Shelby 2.2TII 1989 Shadow ES 2.5TI 1992 Lebaron Sedan 3.0Auto 1993 Acclaim 2.5TI-A520 Hoard parts now!
[SIGPIC][/SIGPIC][FONT=Comic Sans MS]'91 Shadow convertible 2.5 auto, three core RP IC, S60/.48 stg 1, ported two-piece intake/52mm TB, Menegon +1 swirl, 88 turbo cam, Venolias, Crower rods, TU deep sump pan, ported exhaust, 3" from SV to TP, Hughes TC, Peloquin diff, DSS L5 driveshafts, Shelgame cal, Koni struts/shocks. [/FONT]
[SIGPIC][/SIGPIC][FONT=Comic Sans MS]'91 Shadow convertible 2.5 auto, three core RP IC, S60/.48 stg 1, ported two-piece intake/52mm TB, Menegon +1 swirl, 88 turbo cam, Venolias, Crower rods, TU deep sump pan, ported exhaust, 3" from SV to TP, Hughes TC, Peloquin diff, DSS L5 driveshafts, Shelgame cal, Koni struts/shocks. [/FONT]
You can do the +1 with a stock seat you may want to verify
[SIGPIC][/SIGPIC][FONT=Comic Sans MS]'91 Shadow convertible 2.5 auto, three core RP IC, S60/.48 stg 1, ported two-piece intake/52mm TB, Menegon +1 swirl, 88 turbo cam, Venolias, Crower rods, TU deep sump pan, ported exhaust, 3" from SV to TP, Hughes TC, Peloquin diff, DSS L5 driveshafts, Shelgame cal, Koni struts/shocks. [/FONT]
Going lean with do the same damage, ask me how I know,
Also, take off the turbine housing and inspect the wheel, guaranteed its damaged, the inducer is the one that takes the hit but you can't see that until you remove the housing.
1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
2004 GSW TDI, 5 speed, fully loaded, modified.
Aurora ignition wires for sale. Link to info
Super60 roller cams or custom/billet cams. Link to info
I'm building up my spare Menegon head (thanks Steve!) now, but I'm going back with a TU Super 70 and a .48 turbine housing. I'm tired of the hybrid lag. My rings hadn't completely seated even after 2000 miles, so while it's apart I'm going to put new iron ITM second compression rings and oil rings in, but keep the steel top rings from the existing set.
[SIGPIC][/SIGPIC][FONT=Comic Sans MS]'91 Shadow convertible 2.5 auto, three core RP IC, S60/.48 stg 1, ported two-piece intake/52mm TB, Menegon +1 swirl, 88 turbo cam, Venolias, Crower rods, TU deep sump pan, ported exhaust, 3" from SV to TP, Hughes TC, Peloquin diff, DSS L5 driveshafts, Shelgame cal, Koni struts/shocks. [/FONT]
Scrap plan "A". I took the .63 housing off of the S 70 to put the .48 on and see that the turbine has been clipped. So, I will be using my S60 with a .48 instead. Why would anyone clip a turbine!? Oh bother.
[SIGPIC][/SIGPIC][FONT=Comic Sans MS]'91 Shadow convertible 2.5 auto, three core RP IC, S60/.48 stg 1, ported two-piece intake/52mm TB, Menegon +1 swirl, 88 turbo cam, Venolias, Crower rods, TU deep sump pan, ported exhaust, 3" from SV to TP, Hughes TC, Peloquin diff, DSS L5 driveshafts, Shelgame cal, Koni struts/shocks. [/FONT]
Why clip, cheaper version of going to a larger A/R housing. You shouldn't have lag with a stage II 50 trim?
1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
2004 GSW TDI, 5 speed, fully loaded, modified.
Aurora ignition wires for sale. Link to info
Super60 roller cams or custom/billet cams. Link to info
Too much for my purposes. The hybrid doesn't have full boost until 3500 rpm. BTW I pulled the turbine housing in the hybrid and there is no damage at all. That piece of valve somehow limboed through the entire exhaust tract without hitting anything important!
Latest hitch is that two intake bolt holes have stripped on the new head, so it's heli-coil time.
[SIGPIC][/SIGPIC][FONT=Comic Sans MS]'91 Shadow convertible 2.5 auto, three core RP IC, S60/.48 stg 1, ported two-piece intake/52mm TB, Menegon +1 swirl, 88 turbo cam, Venolias, Crower rods, TU deep sump pan, ported exhaust, 3" from SV to TP, Hughes TC, Peloquin diff, DSS L5 driveshafts, Shelgame cal, Koni struts/shocks. [/FONT]
I'm glad I still have my trusty S60. It gives full boost at 2800 with the .63, so the .48 should make it very responsive.
Last edited by John B; 08-10-2014 at 03:28 AM.
[SIGPIC][/SIGPIC][FONT=Comic Sans MS]'91 Shadow convertible 2.5 auto, three core RP IC, S60/.48 stg 1, ported two-piece intake/52mm TB, Menegon +1 swirl, 88 turbo cam, Venolias, Crower rods, TU deep sump pan, ported exhaust, 3" from SV to TP, Hughes TC, Peloquin diff, DSS L5 driveshafts, Shelgame cal, Koni struts/shocks. [/FONT]
1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
2004 GSW TDI, 5 speed, fully loaded, modified.
Aurora ignition wires for sale. Link to info
Super60 roller cams or custom/billet cams. Link to info
The clipped turbine is probably responsible for the poor response you were getting.
[SIGPIC][/SIGPIC][FONT=Comic Sans MS]'91 Shadow convertible 2.5 auto, three core RP IC, S60/.48 stg 1, ported two-piece intake/52mm TB, Menegon +1 swirl, 88 turbo cam, Venolias, Crower rods, TU deep sump pan, ported exhaust, 3" from SV to TP, Hughes TC, Peloquin diff, DSS L5 driveshafts, Shelgame cal, Koni struts/shocks. [/FONT]
2800 is damn good, my stock Garrett hardly spools that quick! Of course, a ported head helps too Mine is stock head/valvetrain still...