Page 5 of 5 FirstFirst 12345
Results 81 to 82 of 82

Thread: Staggered H2O/Meth injection

  1. #81
    turbo addict
    Join Date
    Dec 2005
    Location
    Sylmar, CA
    Posts
    2,537

    Re: Staggered H2O/Meth injection

    Zin, I'll post part numbers or pics of parts with their boxes with numbers; both the pump and accumulator are off of ebay; the other parts too for that matter.

    Great question Mike M, and Rider thanks for that pdf where at the end it says "Pure methanol displays a much more moderate behavior" as compared to diluted methanol. Out of safety, with the pump and reservoir inside the car, I was not going to run any mix greater than 50%. So . . . . . after Marra's input, now I'm rethinking the precompressor spray. Maybe limit it to distilled water? Straight water, after all, is far better than methanol at heat absorbtion/charge cooling but it IS nice to add fuel via methanol.

    I've been dreaming of running tests with the twin probe pyrometer that I bought from Asa Cannell's to see how much temp reduction each jet does or does not provide, especially to see how much/whether the pre-turbo jet is worthwhile. I've drilled and tapped the Ramerati intake manifold and the high side its A/W intercooler to see what it does too. I also want to use those 1/8th NPT ports to check pressure differential in that intercooler and to compare it to the giant Spearco A/A that's in this GLHT.

    Maybe there's a water soluble top end lube - Castor? - that can inhibit intercooler corrosion? I sent an email asking that question to a racing fuel/castor oil dealer that I know. Probably good for the pump, solenoid valves, and the engine too. But castor is tricky stuff, don't want a clogged jet!

    Pics - Two solenoids, tank, 100 feet of poly hose with .6" ID - not 50 feet - .6" x100 feet = 1.45 gallons so system total at least 2 gallons, jet holders, and poly tube label.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	H20 Injection GLHT 001.JPG 
Views:	37 
Size:	1.23 MB 
ID:	58445   Click image for larger version. 

Name:	H20 Injection GLHT 002.JPG 
Views:	38 
Size:	1.57 MB 
ID:	58446   Click image for larger version. 

Name:	H20 Injection GLHT 004.JPG 
Views:	38 
Size:	2.12 MB 
ID:	58447   Click image for larger version. 

Name:	H20 Injection GLHT 005.JPG 
Views:	40 
Size:	2.15 MB 
ID:	58448   Click image for larger version. 

Name:	H20 Injection GLHT 006.JPG 
Views:	39 
Size:	1.80 MB 
ID:	58449  
    Last edited by johnl; 06-02-2016 at 07:53 PM.
    John Laing "The sole condition which is required in order to succeed in centralizing the supreme power in a democratic community, is to love equality, or to get men to believe you love it. Thus the science of despotism, which was once so complex is simplified, and reduced . . . . to a single principle." -- Alexis de Tocqueville "One of the methods used by statists to destroy capitalism consists in establishing controls that tie a given industry hand and foot, making it unable to solve its problems, then declaring that freedom has failed and stronger controls are necessary." --Ayn Rand "To evolve, you don't need a Constitution. All you need is a legislature and a ballot box . . . . things will evolve as much as you want. All of these changes can come about democratically; you don't need a Constitution to do that and it's not the function of a Constitution to do that." -- Justice Antonin Scalia

  2. #82
    Supporting Member Turbo Mopar Contributor Ondonti's Avatar
    Join Date
    Dec 2005
    Location
    Seattle
    Posts
    7,031

    Re: Staggered H2O/Meth injection

    I just bought 5 gallons in an old race can from a methanol Sprint car team. They have top end lube mixed in so the stuff is pink. I don't know that I would keep mixing that stuff in as I would probably get refills from a larger supplier. I am running Pre turbo right now on my daily
    Brent
    GREAT DEPRESSION RACING
    1992 Duster 3.0 The Junkyard- Now - Megasquirt II/Extra. OEM 10:1 3.0 + funny business
    - Old - 11.5@125 22psi $90 Stock 3.0 Junk Motor - 516whp 519wtq 20psi 91 oct built 3.0 stock n/a computer
    1994 Spirit 3.0 - 12.3@113 15 psi - Daily Holset He341 280whp 304ft/lb @10psi
    1994 Spirit 3.0 a670 - Wife's - Disassembled
    1990 Spirit 3.0 E.S. 41TE
    1993 Spirit 3.0 E.S. 41TE
    1994 Duster 3.0 A543
    1990 Lebaron Coupe 2.2 TII non IC, T1 31TH
    1981 Starlet KP61 Potential driver, 1981 Starlet KP61 Parts, 1983 Starlet KP61 Drag
    1998 Dodge 12v Cummins 47re 4x4 4dr longbed. No fuel plate. Mack plug, AFC & Spring mods. Boost elbow.

Page 5 of 5 FirstFirst 12345

Similar Threads

  1. Devil's Own Water/Meth Injection Kits
    By SebringLX in forum General Vendor Area
    Replies: 19
    Last Post: 08-06-2010, 10:45 AM
  2. 5th injector for meth injection
    By 83Shelby in forum Engine - Block, Piston, Heads, Intakes
    Replies: 5
    Last Post: 10-30-2009, 08:06 PM
  3. big boost with pump gas & meth/H2O
    By CSXT802 in forum Electrical & Fuel System
    Replies: 10
    Last Post: 09-06-2009, 08:36 PM
  4. Devil's Own Water/Meth Injection Kits
    By SebringLX in forum Group Buys
    Replies: 7
    Last Post: 07-19-2008, 09:59 PM
  5. Water/Meth Injection Pics
    By EngineRunup in forum H2O / N2O/ Alky Injection
    Replies: 1
    Last Post: 02-24-2006, 06:10 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •