2.2/2.5 big plenum custom intake GROUP BUY

[GLHNSLHT2]

I agree! But now I have to get a billet 1 piece rail since I only have a 2 piece rail atm.

Adding a spacer between the fuel rail mounts and the bottom of the plenum plate will allow you to run your 2 piece billet rail.

[moparzrule]

Nice! That's great to know, thanks!

[DetroitTurbo]

Does it not work with the saginaw pump because it sits lower than the stock intakes?

[acannell]

Does it not work with the saginaw pump because it sits lower than the stock intakes?

its the plenum length...actually the prototype is installed in my daytona with a saginaw, but I had to cut the plenum right up to the opening for the runner. I made the plenum longer for the production versions to create some space there, and so thats why it needs the ZF or none

[GLHT_yeah_baby!]

3 weeks ago I had made up my mind to get rid of the Omni before winter......this has really reeled me back in and feel very motivated to finally start my build.
Please put me down for one purchase, L-body. Thanks!

[acannell]

3 weeks ago I had made up my mind to get rid of the Omni before winter......this has really reeled me back in and feel very motivated to finally start my build.
Please put me down for one purchase, L-body. Thanks!

AWESOME!! THANK YOU GLHT YEAH BABY INDEED!

We're only 7 away!!!!!!

1. Vicus (TD, L-body)
2. Vigo (TM, L-body)
3. signsoflife22 aka knownenemy (TD, L-body)
4. Shadow (TD, L-body)
5. Turbulence (TM, L-body)
6. Pageophile (TM, L-body)
7. tryingbe (TM, L-body)
8. 88C/S (TM, waiting for body type confirm)
9. k03hemi (TM)
10. iTurbo (TM)
11. moparzrule (TM)
12. Old Man Jones (TM)
13. GLHT_yeah_baby! (TM)
14.
15.
16.
17.
18.
19.
20.

[acannell]

WOW!! THANK YOU MOPARMARK1!!!

We're really in the home stretch now!!

1. Vicus (TD, L-body)
2. Vigo (TM, L-body)
3. signsoflife22 aka knownenemy (TD, L-body)
4. Shadow (TD, L-body)
5. Turbulence (TM, L-body)
6. Pageophile (TM, L-body)
7. tryingbe (TM, L-body)
8. 88C/S (TM, waiting for body type confirm)
9. k03hemi (TM)
10. iTurbo (TM)
11. moparzrule (TM)
12. Old Man Jones (TM)
13. GLHT_yeah_baby! (TM, L-body)
14. Moparmark1 (TD, J-body)
15.
16.
17.
18.
19.
20.

[k03hemi]

Can you put me down for two more ?

[moparzrule]

Sweet, this is happening so fast that perhaps I can get this intake before I get my engine in. That would be so ideal. Only 4 more needed woot.

[acannell]

Can you put me down for two more ?

UNBELIEVABLE!! THANK YOU K03HEMI ONCE AGAIN!!!!!

You are going to have some BAD A$$ TURBO MOPARS!!!

1. Vicus (TD, L-body)
2. Vigo (TM, L-body)
3. signsoflife22 aka knownenemy (TD, L-body)
4. Shadow (TD, L-body)
5. Turbulence (TM, L-body)
6. Pageophile (TM, L-body)
7. tryingbe (TM, L-body)
8. 88C/S (TM, waiting for body type confirm)
9. k03hemi (TM)
10. iTurbo (TM)
11. moparzrule (TM)
12. Old Man Jones (TM)
13. GLHT_yeah_baby! (TM, L-body)
14. Moparmark1 (TD, J-body)
15. k03hemi (TM)
16. k03hemi (TM)
17.
18.
19.
20.

[LaserDad]

Okay, add me to the list. I've got a G-body, but think that the L-body would give me more firewall clearance. I'll go with whichever you recommend.

[acannell]

Okay, add me to the list. I've got a G-body, but think that the L-body would give me more firewall clearance. I'll go with whichever you recommend.

LASERDAD!! THANK YOU!!!

1. Vicus (TD, L-body)
2. Vigo (TM, L-body)
3. signsoflife22 aka knownenemy (TD, L-body)
4. Shadow (TD, L-body)
5. Turbulence (TM, L-body)
6. Pageophile (TM, L-body)
7. tryingbe (TM, L-body)
8. 88C/S (TM, waiting for body type confirm)
9. k03hemi (TM)
10. iTurbo (TM)
11. moparzrule (TM)
12. Old Man Jones (TM)
13. GLHT_yeah_baby! (TM, L-body)
14. Moparmark1 (TD, J-body)
15. k03hemi (TM)
16. k03hemi (TM)
17. LaserDad (TM, G-body)
18.
19.
20.

If you have a G-body you should be fine. I have the prototype installed in my car and there is plenty of room to the firewall!

ONLY THREE MORE TO GO!!!!

[moparzrule]

Actually I might want an L-body version as well, just for the shorter runners.....firewall clearance and better access to the turbo would just be a plus.

[The Pope]

Put me down for 2 intakes, L body BTW

[GLHNSLHT2]

Ahh F it. was going to wait to see what Shadow had for pics but throw me on the list for 1, unwelded, and is there anyway I can have runners that are slightly longer than the Gbody spec??? If you just cut the angle on them at the plenum plate and left the other ends raw that'd be fine. I want to have some extra wiggle room and have the means to cut the runner lengths down myself.

[The Pope]

I also see you have enough meat in a photo for a 655, cutting any for that or port your own?

[GLHNSLHT2]

Oh Also I would like No holes drilled in the plenum. I'll put them where I want them.

[Spiritman]

Ready and waiting. P body

[acannell]

THE GROUP BUY IS NOW CLOSED!!

THANK YOU ALL VERY MUCH!!!!!!


Looks like we may have gone beyond 20 orders! I limited it to 20 because I didn't want to bite off more work than I could chew!

So those people who got on the list above and beyond 20, I hope you can give me a few extra weeks beyond the normal delivery time, to get yours done!

If anyone who is not on the list would like to get one, please let me know, and when the next batch becomes available, you will be notified first!

OR, IF ANYONE DROPS OUT, YOU CAN TAKE THEIR PLACE! So please post in this thread if you would like to be put in reserve/or for next batch.

I wont be asking for deposits until we get more fitment testing data in so the design can be finalized.

Please stay tuned to the official R&D thread for the latest fitment testing and design information:

http://www.turbododge.com/forums/f32...ml#post3410593

Also, Shadow has a thread documenting his experience with this intake here:

http://www.turbo-mopar.com/forums/sh...on-the-horizon!

And Knownenemy also has a thread documenting his fitment testing here:

http://www.turbododge.com/forums/f4/...ct-log-17.html

Heres the final GROUP BUY list! For everyones entertainment I've put down the times today they jumped in!! THINGS GOT CAHRAAYZAYY!

1. Vicus (TD, L-body)
2. Vigo (TM, L-body)
3. signsoflife22 aka knownenemy (TD, L-body)
4. Shadow (TD, L-body)
5. Turbulence (TM, L-body)
6. Pageophile (TM, L-body)
7. tryingbe (TM, L-body)
8. 88C/S (TM, waiting for body type confirm)
9. k03hemi (TM)
10. iTurbo (TM)
11. moparzrule (TM)
12. Old Man Jones (TM)
13. GLHT_yeah_baby! (TM, L-body)
14. Moparmark1 (TD, J-body)
15. k03hemi (TM)
16. k03hemi (TM)
17. LaserDad (TM, G-body)
18. moparzrule (TM, L-body) 6:22pm
19. The Pope (TM, L-body) 6:24pm
20. The Pope (TM, L-body) 6:24pm
21. GLHNSLHT2 (TM, L-body) 6:25pm
22. byghtn (TD, L-body) 7:44pm
23. byghtn (TD, L-body) 7:44pm

A **HUGE** THANK YOU TO moparzrule, The Pope, GLHNSLHT2, and byghtn!!!!!!!!!!!!!!!!!!!!!!!!

Some questions AND answers:

moparzule: are you ordering a second intake? you said MIGHT?
GLHNSLHT2: Yes you can have longer runners, and the plenum only comes with one hole where the brake booster vac sources. when time comes for deposits, I'll get everyones final preferences.
The Pope: I did some investigation in Solidworks regarding opening up these flanges to the 655 and it looks VERY promising! Check out this post: http://www.turbododge.com/forums/f32...ml#post3345593. I am not currently going to be cutting the flanges for a 655, but the porting you'd have to do for them is very minimal!

By the way, I missed all the action today because I was in another universe 3D scanning the swirl head intake port, and it went VERY WELL!!! Just thought I'd share that! Totally off topic!!!

http://www.turbododge.com/forums/f32...ml#post3410881

THANK YOU EVERYBODY!! THIS IS GOING TO BE A BLAST!!!

[acannell]

Ready and waiting. P body

1. Vicus (TD, L-body)
2. Vigo (TM, L-body)
3. signsoflife22 aka knownenemy (TD, L-body)
4. Shadow (TD, L-body)
5. Turbulence (TM, L-body)
6. Pageophile (TM, L-body)
7. tryingbe (TM, L-body)
8. 88C/S (TM, waiting for body type confirm)
9. k03hemi (TM)
10. iTurbo (TM)
11. moparzrule (TM)
12. Old Man Jones (TM)
13. GLHT_yeah_baby! (TM, L-body)
14. Moparmark1 (TD, J-body)
15. k03hemi (TM)
16. k03hemi (TM)
17. LaserDad (TM, G-body)
18. moparzrule (TM, L-body)
19. The Pope (TM, L-body)
20. The Pope (TM, L-body)
21. GLHNSLHT2 (TM, L-body)
22. byghtn (TD, L-body)
23. byghtn (TD, L-body)

BACKUP/RESERVE/FUTURE ORDER LIST

24. Spiritman (TM, P-body)

Gotcha Spiritman!