Page 1 of 3 123 LastLast
Results 1 to 20 of 52

Thread: T3 Parts, Spirit Parts, and Misc.

  1. #1
    Mitsu booster
    Join Date
    Jul 2010
    Location
    Pennsylvania
    Posts
    30

    T3 Parts, Spirit Parts, and Misc.

    Date: 10th July 2014
    Username: Dohcturbo
    Full Name:Nick Young
    City, State, Zip:Manheim,PA 17545
    Contact: Dakracer@hotmail.com
    Price: Make Offers

    I'm clearing out my T3 parts:

    I'm 45min from Carlisle in Manheim PA 17545


    Here is a list of what I've put togeather so far, let me know if your interested in anything.
    Drilled and slotted rotors front and rear
    RDI intake manifold
    Stock Cam Cores pair
    Lonewolf Stage 2 Cams
    Complete head with rockers
    92 Spirit R/T 150MPH Cluster
    Under drive pulley
    3" down pipe
    Stock Computer 91 Spirit R/T
    Pair nice aftermarket headlights Spirit stock replacements
    Strut tower brace
    Panhard bar
    Cam/crank sensor
    Message center Spirit
    Gauge pillar pod Spirit
    Gauge pod for message center Spirit
    Snorkel, tab broke on bottom
    T3 block with arp studs
    California car cover Spirit
    Overhead console Both Spirit and daytona
    New reman front brake calipers
    58mm throttle body
    Water neck
    Engine brackets and accessories

    Thanks,
    Nick


    I also have a 89 T2 wiring harness, 93+ lebaron header panel, and a 89 lebaron sunroof and a front mount intercooler kit off an 8V Spirit using a RX7 intercooler
    I also have 2 GLH wheels, set of turbo minivan hub caps, set of 15" Shadow ES Hubcaps

  2. #2
    Supporting Member Turbo Mopar Contributor Turbo Joe's Avatar
    Join Date
    Dec 2005
    Location
    South Coast Ma.
    Posts
    884

    Re: T3 Parts, Spirit Parts, and Misc.

    more info on the head please. what year is it and is it ported or cracked or ?????? thanks
    also how much for the head and how much for the cam/crank sensors?
    Turbo Joe
    ----------------------- 87 CSX #175 TIII powered, MegaSquirt3 Pro Ultimate, GTX3076R, Turbo Joe header, Lengel intake, Menegon ported head, the list goes on

  3. #3

    Re: T3 Parts, Spirit Parts, and Misc.

    How much for rdi intake manifold?

  4. #4
    Mitsu booster
    Join Date
    Jul 2010
    Location
    Pennsylvania
    Posts
    30

    Re: T3 Parts, Spirit Parts, and Misc.

    Head is off a 60,000 mile 91 Spirit R/T. Stock, no port work, never welded, not cracked.
    Ran and drove fine when removed.
    $800 for the head
    $200 for cam and crank sensors
    $800 for RDI intake, it is new never ran.

  5. #5
    Hybrid booster Turbo Mopar Contributor
    Join Date
    May 2008
    Location
    Green Bay area Wisconsin
    Posts
    676

    Re: T3 Parts, Spirit Parts, and Misc.

    lone wolf cams price?

  6. #6
    Mitsu booster
    Join Date
    Jul 2010
    Location
    Pennsylvania
    Posts
    30

    Re: T3 Parts, Spirit Parts, and Misc.

    $350 for the cams

  7. #7
    Supporting Member Turbo Mopar Contributor Turbo Joe's Avatar
    Join Date
    Dec 2005
    Location
    South Coast Ma.
    Posts
    884

    T3 Parts, Spirit Parts, and Misc.

    Ok cool let me know what year the head is. Its casted in between the cam gears on the head. I'll pass on the sensors though
    Turbo Joe
    ----------------------- 87 CSX #175 TIII powered, MegaSquirt3 Pro Ultimate, GTX3076R, Turbo Joe header, Lengel intake, Menegon ported head, the list goes on

  8. #8
    Mitsu booster
    Join Date
    Jul 2010
    Location
    Pennsylvania
    Posts
    30

    Re: T3 Parts, Spirit Parts, and Misc.

    Its a 91 casting head

  9. #9
    Mitsu booster
    Join Date
    Dec 2012
    Location
    downriver mi
    Posts
    38

    Re: T3 Parts, Spirit Parts, and Misc.

    I'm looking for a OEM valley/spark plug cover if you have one

  10. #10
    Mitsu booster
    Join Date
    Jul 2010
    Location
    Pennsylvania
    Posts
    30

    Re: T3 Parts, Spirit Parts, and Misc.

    I will have to look, I have tubs and tubs of T3 stuff so give me a couple days to dig thru it.
    I know I have aftermarket Aluminum ones if you want one of those.

  11. #11
    Mitsu booster
    Join Date
    May 2014
    Location
    Michigan
    Posts
    16

    Re: T3 Parts, Spirit Parts, and Misc.

    I need a few odds and ends to put into a Daytona IROC R/T:
    1) Mounting bracket and hardware for stock air box to bolt it to the back of the head.
    2) Air box with good heat shield.
    3) LH rear marker light.
    4) Drain plugs for spare tire well.
    5) Fuse box cover for under the hood.
    6) Hood bumpers (LH primarily).
    7) Wiring harness to the O2 sensor at the turbo.

    What do you want for the snorkel?

    Thanks,
    Matt

  12. #12
    Mitsu booster
    Join Date
    Jul 2010
    Location
    Pennsylvania
    Posts
    30

    Re: T3 Parts, Spirit Parts, and Misc.

    Hi Matt, let me look I may have an air box and bracket. I'm sure I have an O2 plug but I always run new wire to reroute it off the exhaust manifold.
    $200 for the snorkel
    thanks,
    Nick

  13. #13
    Garrett booster
    Join Date
    May 2012
    Location
    mass
    Posts
    127

    Re: T3 Parts, Spirit Parts, and Misc.

    Happen to have a injector harness and how much do you need for the computer ?

    Thank you

  14. #14
    Mitsu booster
    Join Date
    Jul 2010
    Location
    Pennsylvania
    Posts
    30

    Re: T3 Parts, Spirit Parts, and Misc.

    Let me check on the injector harness, $100 for computer

  15. #15
    turbo addict moparzrule's Avatar
    Join Date
    Dec 2005
    Location
    Carlisle, PA
    Posts
    7,081

    Re: T3 Parts, Spirit Parts, and Misc.

    How much for the strut tower brace?

  16. #16
    Mitsu booster
    Join Date
    Jul 2010
    Location
    Pennsylvania
    Posts
    30

    Re: T3 Parts, Spirit Parts, and Misc.

    $50 for the strut tower brace

    - - - Updated - - -

    I updated the list with prices
    Here is a list of what I've put togeather so far, let me know if your interested in anything.
    Drilled and slotted rotors front and rear $50
    RDI intake manifold $800
    Stock Cam Cores pair $250
    Lonewolf Stage 2 Cams $350
    Complete head with rockers $750
    92 cluster $250
    Under drive pulley $50
    3" down pipe $50
    Stock Computer $100
    Pair nice aftermarket headlights $50
    Strut tower brace $50
    Panhard bar $50
    Cam/crank sensor $200
    Message center $20
    Gauge pillar pod $50
    Gauge pod for message center $50
    Snorkel, tab broke on bottom $200
    T3 block with arp studs $50
    California car cover $75
    Overhead console $50
    New reman front brake calipers $20
    58mm throttle body $50
    Water neck $50
    Engine brackets and accessories

    Thanks,
    Nick


    I also have a 89 T2 wiring harness $50 , 93+ lebaron header panel $50, and a 89 lebaron sunroof $20

  17. #17
    Mitsu booster
    Join Date
    Dec 2012
    Location
    downriver mi
    Posts
    38

    Re: T3 Parts, Spirit Parts, and Misc.

    Any luck on locating your OEM T3 valley cover??

  18. #18
    Supporting Member Turbo Mopar Contributor Turbo Joe's Avatar
    Join Date
    Dec 2005
    Location
    South Coast Ma.
    Posts
    884

    Re: T3 Parts, Spirit Parts, and Misc.

    Quote Originally Posted by Dohcturbo View Post
    Its a 91 casting head
    wow I'm sorry i just noticed this response just now... I was wondering why it was taking a while.. I feel silly.
    if you could get a few pics of the deck and valley and such if possible. i've bought a head before that was supposed to be in good shape but was actually not.. So i kind of like to have pics.
    Turbo Joe
    ----------------------- 87 CSX #175 TIII powered, MegaSquirt3 Pro Ultimate, GTX3076R, Turbo Joe header, Lengel intake, Menegon ported head, the list goes on

  19. #19
    Mitsu booster
    Join Date
    Jul 2010
    Location
    Pennsylvania
    Posts
    30

    Re: T3 Parts, Spirit Parts, and Misc.

    Spearscrue- yes I did. 3 of the bolt holes are ripped. I have pics I can send.
    Turbo Joe- where do you want me to send them?

  20. #20
    Supporting Member Turbo Mopar Contributor Turbo Joe's Avatar
    Join Date
    Dec 2005
    Location
    South Coast Ma.
    Posts
    884

    Re: T3 Parts, Spirit Parts, and Misc.

    Pm sent
    Turbo Joe
    ----------------------- 87 CSX #175 TIII powered, MegaSquirt3 Pro Ultimate, GTX3076R, Turbo Joe header, Lengel intake, Menegon ported head, the list goes on

Page 1 of 3 123 LastLast

Similar Threads

  1. General Misc Turbo Parts Spirit R/T, guages etc L@@K
    By 90TSpirit in forum Parts For Sale
    Replies: 1
    Last Post: 12-06-2012, 09:08 AM
  2. General Misc Parts on the CHEAP!!!! Spirit R/T exhaust,intake,motor mounts
    By 90TSpirit in forum Parts For Sale
    Replies: 3
    Last Post: 04-25-2012, 04:34 PM
  3. General Misc Parts, A body, Turbo Parts cheap, shipping included
    By 90TSpirit in forum Parts For Sale
    Replies: 6
    Last Post: 11-30-2011, 09:28 AM
  4. Replies: 23
    Last Post: 03-15-2010, 02:16 PM
  5. Replies: 10
    Last Post: 01-25-2008, 07:18 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •