Few questions...

[Boogieman142]

well, i had planned on using a daytona shelby-z swaybar on my car. i went to pull the bar out aand noticed that the brackets are a tab bit different(shelby has stamped, i have cast a-arms) is that just for the bushings or will that bracket bolt up to my a-arms. i figured that i just need the bushings for the cast arms but the size of the bar.

Another question is about rear axles. whats the difference between mine on a 93 lebaron sedan and the 88 shelby-z daytona?


another thing that i noticed is that the front calipers are kelsey hayes if i were to use that caliper bracket could i put them on my 93 lebaron, my bearings are bolted, the tonas are pressed, both are 10" rotors

[Anonymous_User]

As far as the rear axle, the Z axle should be a solid sway bar and have the rear non-vented disc brakes. Will bolt right up to your car, but you will want the master cylinder and porportioning valve from the Z.