Results 1 to 8 of 8

Thread: How does one remove an ignition lock cylinder without a key

  1. #1
    Garrett booster Rebel Rob's Avatar
    Join Date
    Dec 2005
    Location
    Fayette City, PA
    Posts
    138

    How does one remove an ignition lock cylinder without a key

    I am buying an 87 horizon that the key has been lost. In order to tow it home I will need to remove the ignition cylinder I however do not know how to do this without the key. What are my options? I called the local locksmiths and they said it will be $250 that seems a lot excessive.

  2. #2
    two point two much fun Turbo Mopar Staff Turbodave's Avatar
    Join Date
    Dec 2005
    Location
    Northern IL
    Posts
    4,832

    Re: How does one remove an ignition lock cylinder without a key

    If it was me I'd probably just bring a spare column to swap in (one that I have keys to). If you're just needing the front wheels free to get on a trailer you could remove the column and steer it onto the trailer by kicking the tires (done it many times).
    Dave Tekampe
    Director SDAC National
    VP SDAC-Chicago


    85 GLH-Turbo (DC intercooled)
    86 GLHS #107
    87 GLHS #148
    87 CSX #161, #608, #674
    88 CSX-T #529, #541
    89 Shadow Competition Package and lots more...

  3. #3
    Rhymes with tortoise. Turbo Mopar Staff cordes's Avatar
    Join Date
    Dec 2005
    Location
    Tuscola, IL
    Posts
    21,441

    Re: How does one remove an ignition lock cylinder without a key

    I've found that the old L bodys are pretty forgiving key wise. I usually have a key that will unlock the door of ign in them. That being said, I have popped them out with a screw driver before. Although I do recommend Dave's suggestions above that one.

  4. #4
    two point two much fun Turbo Mopar Staff Turbodave's Avatar
    Join Date
    Dec 2005
    Location
    Northern IL
    Posts
    4,832

    Re: How does one remove an ignition lock cylinder without a key

    I also have the janitor key ring full of Chrysler keys, usually can find one that works.
    Dave Tekampe
    Director SDAC National
    VP SDAC-Chicago


    85 GLH-Turbo (DC intercooled)
    86 GLHS #107
    87 GLHS #148
    87 CSX #161, #608, #674
    88 CSX-T #529, #541
    89 Shadow Competition Package and lots more...

  5. #5
    turbo addict
    Join Date
    Jan 2007
    Location
    South Gillies, ON. Canada
    Posts
    2,923

    Re: How does one remove an ignition lock cylinder without a key

    Could pull the steering wheel and try to press the key cylinder release button. but for this to work you need to turn the cylinder.


    car thief style.
    channel lock pliers and a huge standard driver.
    Use the channel locks to tear off the chrome part. then hammer in your screw driver and finally turn with the channel locks.
    1988 Lancer Shelby 2.2TII 1989 Shadow ES 2.5TI 1992 Lebaron Sedan 3.0Auto 1993 Acclaim 2.5TI-A520 Hoard parts now!

  6. #6
    boostaholic
    Join Date
    Feb 2012
    Location
    socal
    Posts
    1,241

    Re: How does one remove an ignition lock cylinder without a key

    Does bumping work on these Chryslers? Its gotten me out of some jams on non-car locks. You put a key all the way in then back out one click, then SMACK the key in while applying turning pressure. If you get all the tumblers to bounce up you're set. Works best with a zero key but I've had it work fine with other random keys too.

    If it works on Chryslers, its pretty easy to file a bump key (with all the valleys going to the bottom) with hand files.
    MinivanRider

  7. #7
    Hybrid booster
    Join Date
    Jan 2007
    Location
    Marietta, GA
    Posts
    795

    Re: How does one remove an ignition lock cylinder without a key

    My old neighbor who was a locksmith made me a key for the Charger, took him about 10 minutes. He stuck a blank key in the door, wiggled it around, pulled it out and filed it by hand where he saw the tumblers hitting. I can't believe a locksmith would charge $250 for that!

  8. #8
    boostaholic
    Join Date
    Feb 2012
    Location
    socal
    Posts
    1,241

    Re: How does one remove an ignition lock cylinder without a key

    I use a local locksmith to make keys for old bikes like that. He does it from the scoring marks for $20 per key.

    Now that I think about it, I have bumped my mini door open when I locked my keys inside. I used the key from another mini. IIRC it took like 10 minutes of bumping until it finally turned. I don't see why it wouldn't work on an ignition lock.
    MinivanRider

Similar Threads

  1. key got stuck in the ignition.
    By francois in forum "I need help!"
    Replies: 4
    Last Post: 04-29-2013, 12:04 PM
  2. Lost my ignition key, best way to get a new one?
    By guyd_15 in forum Maintenance & General Tech
    Replies: 5
    Last Post: 05-12-2012, 11:07 PM
  3. Interior wtb: T-top Key from lock code CC020 87-89
    By Bob the Medic in forum Parts Wanted
    Replies: 8
    Last Post: 04-12-2010, 01:47 PM
  4. General NOS Daytona Door Handle and Key Lock Cylinder
    By steve340 in forum Parts For Sale
    Replies: 0
    Last Post: 03-16-2009, 08:10 PM
  5. HELP: Key Is Stuck In The Ignition!
    By JonsGottaDusta in forum "I need help!"
    Replies: 9
    Last Post: 07-01-2008, 07:28 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •