Hey everyone,Iam interested in possibly doing a 3.0 turbo car for a daily driver. The question I have is what is everyone doing for the rear manifold and crossover ?
Is everyone making there own ? If so what are the using for a rear manifold to start with ? I have searched several build threads and searched many different terms and not come up with anything. Any help is appreciated.
Thank you
Mike
Well if you want to buy a rear and crossover Ed Kelly can probably help you out.
Columbia River Mandrel bends sells head flanges if you want to make something.
Brent GREAT DEPRESSION RACING 1992 Duster 3.0T The Junkyard - MS II, OEM 10:1 -[I] Old - 11.5@125 22psi $90 [U]Stock[/U] 3.0 Junk Motor - 1 bar MAP [/I] 1994 Spirit 3.0T - 11.5@120 20 psi - Daily :eyebrows: Holset He351 -FT600 - 393whp 457ft/lb @18psi 1994 Spirit 3.0T a670 - He341, stock fuel, BEGI. Wife's into kid's project. 1990 Lebaron Coupe 2.2 TI/II non IC, a413 1990 Spirit 3.0 E.S. 41TE -- 1993 Spirit 3.0 E.S. 41TE -- 1994 Duster 3.0 A543 1981 Starlet KP61 Potential driver -- 1981 Starlet KP61 Parts -- 1983 Starlet KP61 Drag 2005 Durango Hemi Limited -- 1998 Dodge 12v 47re. AFC mods, No plate, Mack plug, Boost elbow -- 2011 Dodge 6.7 G56
Thank you for the info. I found his site. Certainly makes it a lot easier !
Posting Permissions
Reply With Quote