Nice! what did you do for the tracks?
That's pretty cool. How much do they weigh?
I used the Omni seat tracks with slight modifications. The track width is wider than the Omni seat, so I made some small tabs to offset the rear mount points. There was enough meat on the front mount of the tracks so I could drill a new hole and bolt through there.
The passenger seat weighs about the same as the Omni seat. The driver seat is a little heavier because of the motor and air pump. I didn't wire any of it yet. I fit snug in the seat already, so it probably doesn't need to adjust.
driver's side seat should be about 72 pounds
Thanks for the info guys. I seem to recall someone posting up that they weighed more than that way back when. I'm glad to hear that they're not all that much after all.
Wow had no idea they are that heavy, makes me want to put mine is storage and stick something lighter in there.
Without the power seat track, the driver's seat is only a bit heavier than the stock Omni seat.
Add to that I'm 265 pounds, so seat weight is my least worry.
The support this seat gives compared to the stock seat makes it worth the swap.