I filled the hole in the front of the hood on my csx where there must have been a emblem at one point in time (Turbo Bulge hood not a stock hood) The hood was painted with a single stage originally, I've been doing some work on repainting parts of the car and have base/clear that I am using. I will eventually be repainting the hood but it's not going to happen before SDAC. Can the base coat itself be buffed to get a shine and blend with the current single stage paint or should I spot spray the area with clear and wet sand and buff that in? I know the base will have no UV protection but I'm not really worried about that as I'll be redoing it over winter and will keep a good coat of wax on it.