'85 Turbo I Logic module chip #

[iTurbo]

Anybody know the chip # or part number for an '85 Turbo I logic module?

I have an '85 TI engine I've built for my '86 GLH Turbo. It is all '85 stuff including the G-head and early distributor. I know I have 1-2 '85 logic modules in my garage, but I am not sure how to positively identify them. One is from an '85 Lancer and the other is from an '85 Shelby Charger. Will either work?

[4 l-bodies]

Jeremy,
The 85 GLHT LM was a couple different part #'s. 5226794 and 5226795. These were federal emissions. There certainly could be more. Your Lancer will work just as well if it was a 5 spd car. The following are all listed as manual 85 LM's. Some will have additional features like voice and nav. while others CA and high altitude cals.
5226266
5226273
5226614
5226618
5226794
5226795
5227061
5227063
5227243

[iTurbo]

Thanks Todd!! I just went out to my garage and got out all the LM's with integrated MAP sensors.

I have:
5226795 (probably from that '85 Shelby Charger I parted out). Sharpie # on red LM connector is illegible.
"unknown p/n" with '334' written in Sharpie on the red LM connector
'unknown p/n" with nothing on the red LM connector.


It looks like I'm good to go with the x795 unit though. I'll have to pop the covers off and see what the chip #s are, but at least now I know I have something I can use.



Also, all '85-'87 Power Modules are the same right? That part should be easy at least.

[4 l-bodies]

Thanks Todd!! I just went out to my garage and got out all the LM's with integrated MAP sensors.

I have:
5226795 (probably from that '85 Shelby Charger I parted out). Sharpie # on red LM connector is illegible.
"unknown p/n" with '334' written in Sharpie on the red LM connector
'unknown p/n" with nothing on the red LM connector.


It looks like I'm good to go with the x795 unit though. I'll have to pop the covers off and see what the chip #s are, but at least now I know I have something I can use.



Also, all '85-'87 Power Modules are the same right? That part should be easy at least.

Yes all 85-87 turbo PM are the same. Just need to find one that has a working voltage regulator inside it. They failed a lot!

[iTurbo]

Awesome, I should have at least 2-3 good PMs out there.