Installing a 6 Button Traveler in a 92 Daytona IROC R/T

[DoubleD]

Was at the junkyard today and found a 6 button traveler out of a 93 Lebaron GTC Convertible. What would need to be done to put this in my R/T. I have the simple traveler in the overhead console that does temperature and compass. I was hoping this was plug and play, but it does not have the plug in my car, I cut the pigtail from the donor car.

What is the wire pin out also?

Also the screen on this 6 button traveler and my overhead traveler are green lit. Everything else is my car has been swapped to blue. What could I do to make my display appear blue.Could I add a blue tint lens on the LCD? I am not sure how to do this.

Here is a pic of the unit and me trying to get it to fire up.

[DoubleD]

I am going to go out on a limb and say that this traveler is not easy to install in my car. I will put this one up for sale and look for a 2 button traveler one.

[blk86trbo]

Here's a link with some good reading. BTW I ended up keeping the 2 button traveler instead of wiring up the 6 button.

Also, would you be able to return to that junkyard? I'm in need of a premium BCM, and I'm pretty sure the one from that 93 Lebaron GTC would suffice. I'd be willing to pay you for your efforts...send me a PM please if that possible.

http://www.turbo-mopar.com/forums/sh...veller+install

[raccoon]

Its not so hard, the 2 button should have the same amount of wires, no?

Pin 1 DK BLU-WHT Ignition, fuse #14
Pin 2 BLK-LT GRN Ground
Pin 3 ORG Defogger SW Dimmable headlights
Pin 4 empty
Pin 5 PNK Dome light
Pin 6 VIO-BRN Data bus +
Pin 7 WHT-BLK Data Bus -

[DoubleD]

I pulled this traveler from a car at the junkyard. Is their any interest in the BCM that goes with this traveler. I am planning to go back tomorrow. If there is interest, I will grab the BCM if it is still there, I would sell both as a pair. I know they are kind of hard to find.

[DoubleD]

Went to the jy today and pulled the matching bcm. I have the pair now.