Results 1 to 11 of 11

Thread: Female Connector for IAC

  1. #1
    Super Moderator Turbo Mopar Staff contraption22's Avatar
    Join Date
    Dec 2005
    Location
    Havertown, PA
    Posts
    9,517

    Female Connector for IAC

    Anybody know of a source for a female connector to match the IAC plug? It's not standard weatherpack.

    Trying to make an extension harness to keep from cutting into my S60 harness.

    Thanks,

    Mike
    Mike Marra
    1986 Plymouth Horizon GLMF "The Contraption" < entertaining sponsorship offers
    Project Log:
    http://www.turbo-mopar.com/forums/showthread.php?69708-The-Contraption-2013-14&highlight=

  2. #2
    boostaholic BIGBRUDDA's Avatar
    Join Date
    Dec 2005
    Location
    cincinnati
    Posts
    1,070

    Re: Female Connector for IAC

    send me a pic Mike .I have a coupla donor harnesses lyin around.

  3. #3
    Super Moderator Turbo Mopar Staff contraption22's Avatar
    Join Date
    Dec 2005
    Location
    Havertown, PA
    Posts
    9,517

    Re: Female Connector for IAC

    Thanks Tim. I've never seen what I'm looking for to take a pic of it. But I'll get a pic of the male end.
    Mike Marra
    1986 Plymouth Horizon GLMF "The Contraption" < entertaining sponsorship offers
    Project Log:
    http://www.turbo-mopar.com/forums/showthread.php?69708-The-Contraption-2013-14&highlight=

  4. #4

    Re: Female Connector for IAC

    Mike the 4 pin connector terminals are sold, I've seen someone post the part number before. Check the electrical sticky thread, I think they may be posted there. I'm fairly certain they are the same ones for the coolant temp sensor, they are both pull through terminals. But you should be able to get them brand new.

    BOOM!

    http://www.turbo-mopar.com/forums/sh...106-Connectors


    Double BOOM!!!

    http://www.mouser.com/ProductDetail/...J3sm80vn8H3g==

    Done and done.
    [SIZE="3"] [B]Jon Trotter[/B][/SIZE] [B]1985[/B] Dodge Shelby Charger, Currently decommissioned [B]1987[/B] Shelby GLHS, #937 [B]1987[/B] Shelby Lancer, #628 [QUOTE=Reeves;587010]I can be ready. Please send pics of wife. _____DodgeZ add comments here______[/QUOTE]

  5. #5
    Super Moderator Turbo Mopar Staff contraption22's Avatar
    Join Date
    Dec 2005
    Location
    Havertown, PA
    Posts
    9,517

    Re: Female Connector for IAC

    Boom.

    Thanks, Jon. Still not what I'm lookin for tho. I'd like to find the opposite connector, to build an extension harness that plugs into the existing harness.

    im not sure what I'm looking for actually exists.
    Mike Marra
    1986 Plymouth Horizon GLMF "The Contraption" < entertaining sponsorship offers
    Project Log:
    http://www.turbo-mopar.com/forums/showthread.php?69708-The-Contraption-2013-14&highlight=

  6. #6

    Re: Female Connector for IAC

    Ok, here is part of the equation for the solution I proposed earlier via PM.

    http://eagleday.com/auwi2.html
    [SIZE="3"] [B]Jon Trotter[/B][/SIZE] [B]1985[/B] Dodge Shelby Charger, Currently decommissioned [B]1987[/B] Shelby GLHS, #937 [B]1987[/B] Shelby Lancer, #628 [QUOTE=Reeves;587010]I can be ready. Please send pics of wife. _____DodgeZ add comments here______[/QUOTE]

  7. #7
    Super Moderator Turbo Mopar Staff 135sohc's Avatar
    Join Date
    Aug 2008
    Location
    SoMd
    Posts
    6,178

    Re: Female Connector for IAC

    Quote Originally Posted by contraption22 View Post
    Boom.

    Thanks, Jon. Still not what I'm lookin for tho. I'd like to find the opposite connector, to build an extension harness that plugs into the existing harness.

    im not sure what I'm looking for actually exists.
    I do not think it does. In the world of Delphi those connectors are made to plug into something and call it done.

    If you have an old IAC motor to cut up it might be possible to make something.

  8. #8

    Re: Female Connector for IAC

    http://www.clipsandfasteners.com/Wed...r_p/a14888.htm

    For the SMEC (I think, someone may want to confirm)


    http://www.clipsandfasteners.com/Chr...e_p/a16804.htm

    For the LMs (99.9999% sure)


    http://eagleday.com/auwi2.html

    All colors available, well close enough for me.

    IAC
    OEM Gray/Red (Slate/Red)
    OEM Yellow/Black (Same)
    OEM Brown w/tracer (Brown)
    OEM Violet/Black (Purple/Black)

    TPS
    OEM Violet/White (Purple/White)
    OEM Orange/Dark Blue (Orange/Blue)
    OEM Black/Light Blue (Black/Blue)

    Buy to length, terminate both ends and you're done. I'm using this wire from this vendor for my injector harness. It's automotive wiring, so it's rated for the heat. The stuff I've purchased in bulk from other places before was not and it cracked within weeks of running it on the car.
    Last edited by minigts; 04-11-2014 at 04:22 PM.
    [SIZE="3"] [B]Jon Trotter[/B][/SIZE] [B]1985[/B] Dodge Shelby Charger, Currently decommissioned [B]1987[/B] Shelby GLHS, #937 [B]1987[/B] Shelby Lancer, #628 [QUOTE=Reeves;587010]I can be ready. Please send pics of wife. _____DodgeZ add comments here______[/QUOTE]

  9. #9
    turbo addict
    Join Date
    Dec 2005
    Location
    Lincoln, Nebraska
    Posts
    2,626

    Re: Female Connector for IAC

    Oh heck, I can't read. AIS AIS AIS...oddball plug. Nevermind. But here's some nice female weatherpack connectors if anyone's looking for one.


    First two results searching 'weatherpack connectors' on Startpage.com, what about these?


    http://www.whiteproducts.com/connectors.shtml
    Half way down the page.


    #WPS-4 (12010974)



    Or perhaps this guy?
    http://www.waytekwire.com/item/38046...NECTOR-SHROUD/

    WEATHERPACK CONNECTOR SHROUD HALF 4 CONTACT BODY 12010974
    “If the people of the nation understood our banking and monetary system, I believe there would be a revolution before tomorrow morning.” -Henry Ford

  10. #10
    Hybrid booster
    Join Date
    Jul 2008
    Location
    midwest
    Posts
    427

    Re: Female Connector for IAC

    DIYautotune has all the connectors for our cars except for the HEP sensor. i bought all new connectors for my car when i started my megasquirt conversion.

  11. #11
    Super Moderator Turbo Mopar Staff contraption22's Avatar
    Join Date
    Dec 2005
    Location
    Havertown, PA
    Posts
    9,517

    Re: Female Connector for IAC

    Thank you all.
    Mike Marra
    1986 Plymouth Horizon GLMF "The Contraption" < entertaining sponsorship offers
    Project Log:
    http://www.turbo-mopar.com/forums/showthread.php?69708-The-Contraption-2013-14&highlight=

Similar Threads

  1. Engine 91-93 TPS and IAC sensors from TIII
    By Xtrempickup in forum Parts Wanted
    Replies: 3
    Last Post: 08-05-2010, 07:30 PM
  2. IAC situation
    By HemiShelby in forum "I need help!"
    Replies: 8
    Last Post: 02-14-2010, 11:11 PM
  3. Female side Map sensor pigtail...Anyone make them?
    By 89ShelbyGuy in forum Electrical & Fuel System
    Replies: 0
    Last Post: 07-13-2009, 11:00 AM
  4. looking for source for female 1/4" terminals
    By 4 l-bodies in forum Electrical & Fuel System
    Replies: 11
    Last Post: 04-11-2009, 12:15 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •