Updated list-
1) Need s single metal clip from a p-body lower dash cover (there is 5 total holding the piece on) the same clip is used on Spirits for the headlamp switch bezel.
2) underhood lamp, same as Daytona and Lancer perhaps?
Gary Donovan
Updated list-
1) Need s single metal clip from a p-body lower dash cover (there is 5 total holding the piece on) the same clip is used on Spirits for the headlamp switch bezel.
2) underhood lamp, same as Daytona and Lancer perhaps?
Gary Donovan
Last edited by mopar-tech; 06-18-2015 at 05:41 AM.
Working on clearing the decks.
I probably have those. I'll look tmorrow and let you know.
Thanks!
Working on clearing the decks.
If ajakeski doesn't, I have a good dash bezel and nos. (fixed latch). P.M. if interested
Here is photo of the bezel. It's from a CSX -T for added authenticity.
Unfortunatly I dont have the window doodads.
I sent you a PM.
Looking for a coolant reserve tank, a windshield washer tank with low fluid sensor, hood to cowl seal that runs across the back of the engine bay and a good windshield mounted day/night mirror.
Gary
Working on clearing the decks.
You want to try some minivan window latches so you can have opening rear windows? Looks about the same. I have a couple extra.
Wayne H.
'91 Dodge Spirit ES 2.5L turbo 5spd
'05 PT GT 2.4T HO autostick (RIP)
'89 Plymouth Acclaim 2.5L turbo auto, "Slugmobile" yes, THE Slugmobile!
'89 Dodge Caravan SE 2.5L turbo auto, "Mean Mini" yes, Gus' Mean Mini! (Current best 11.699 @ 114.43 mph! - Oct 15th, 2022 Cecil County Dragway, MD)
MeanMini dragracing videos: https://www.youtube.com/playlist?lis...URZLB1RxGYF6vw
and other cars, trucks and motorcycles
https://www.youtube.com/user/SlugmobileMeanMini
Nope, I think it is actually covered (pending deal) but the backup plan is to make some from aluminum if need be.Originally Posted by wheming
Working on clearing the decks.
ive got the bracket and nuts, whats the reserve tank look like? ill go check, ill have it all.
1988 Lancer Shelby 2.2TII 1989 Shadow ES 2.5TI 1992 Lebaron Sedan 3.0Auto 1993 Acclaim 2.5TI-A520 Hoard parts now!
Bracket?
Coolant tank is missing so don't have an answer there. Pretty sure it is the same for TBI/Turbo I though.
I tried looking up an interchange with other vehicles (Daytona/Lancer) but without luck.
I attached a picture from a vehicle that was on Ebay for a frame of reference.
Working on clearing the decks.
Lancer and LeBaron washer tanks will work in your CSX.
Gary,
I'll just send you a bigger box and add the washer tank w/fluid sensor, and the cowl seal. What I found with the coolant bottles is lot's will work with the stock p-body radiator ic set up but, some leave more air gap between bottle and ic reducing heat soak to the ic.
Andrew
All set aside from a lower dash cover or just a clip if anyone has a spare.
I'll epoxy or fill the holes in the current one and paint to match.
I have a line on a parts car but not optimistic, that would sure help speed things up.
Working on clearing the decks.
Updated first post, thanks!
Working on clearing the decks.
I'm parting my 91 shadow Gary lmk what's needed I can give you them at sdac
updated first post.
Working on clearing the decks.
4221150 is the under hood lamp. shows up in the 87 and 94 Shadow part book. I have 26 of them NOS. 26.00 each plus shipping
4221150 is for 1983-94 years
4221008 is for 1981-89 years have lots of these NOS also
since the years overlap the part number must vary depending on year and model application
www.arizonaparts.com
Posting Permissions
Reply With Quote
