Somehow while I was fooling around with fixing my headlights, I've lost power to this fuse, causing a no ignition power/no starter condition. If I jump power to it from the battery, it all works as normal. But I can't find where it's power supply comes from. I have a 1990 wiring manual but '90 had no PDC.
What harness are you using?
It's in my '91 3.0 Daytona, Project LookOwt.
so 91 car with a 90 engine harness 3.0? if so these diagrams below are not what you need.
1988 Lancer Shelby 2.2TII 1989 Shadow ES 2.5TI 1992 Lebaron Sedan 3.0Auto 1993 Acclaim 2.5TI-A520 Hoard parts now!
No, it's a all factory '91, harness and all. It has a PDC. I found the problem, the main fuse was blown at the leg where it goes into the plastic instead of in the middle. So it checked good on top with a test light, but power wasn't getting through it to the wires underneath.
Posting Permissions
Reply With Quote